Next-in-Thread Next Message

Sad Problems with Compex Linkport 

Forum: PCMCIA Network Adapter Issues
Date: 2000, Jul 09
From: Alexandr Berezniatsky Alexandr

I have pcmcia card -Compex Linkport /ENET-A. (I/O Base Address default 320H,Interrupt default 11) (Linux kernel 2.0.34, PCMCIA package 3.0.0) When I insert my card ,Linux detects it but it detects incorrect card (while booting kernel it is written LinkSys Ethercard 10/100Tbase,I/O=300H,IRQ=3) then system gives information that my card wasn't correctly set. What can be done to solve this problem? Thanks!

Next-in-Thread Next Message

Select this message: Problems with Compex Linkport

Messages Inline: 1 All Outline: 1 2 All

1. None Need more info by David Hinds, 2000, Jul 10
(_ Note additional info by Alexandr Berezniatsky, 2000, Jul 10
(_ None Re: Note: additional info by David Hinds, 2000, Jul 10
(_ Ok Thanks!!!!:) by Alexandr Berezniatsky, 2000, Jul 11

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.

If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination

If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages

Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

Members Subscribe No Admin Mode Show Frames Help for HyperNews at 1.10
[ Edit This Forum ]