Next-in-Thread Next Message

Agree I have the same problem! Opened up incident with manufacturer 

Forum: Unsupported PCMCIA Devices
Re: Question AVM Fritz ISDN Card troubles. (Andreas Fink)
Date: 2000, Aug 26
From: Marc Beuchat mbeuchat

Andreas,

I am pleased to see that I am not the only one having this problem :-(

I have also concluded that there is an IO port issue but don't know how to proceed. I opened up a request with the card manufacturer on Friday 25 Aug. Here is a transcript of the problem statement:

----------------------------------------------------------------------------

Product: FRITZ!Card PCMCIA

ISDN-Controller : FRITZ!Card PCMCIA

Operating system : linux 2.2.16 (redhat 6.2 distribution)

CAPI driver : Rev 1.12

I have a FRITZ!Card PCMCIA (v2.0) which I use with my Sony VAIO C1XN laptop. It worked well when I was running Windows 2000 on the laptop. I recently installed linux redhat 6.2 on the laptop. I compiled the kernel 2.2.16 and compiled the pcmcia cardservices package.

Everything works. I am able to use my other pcmcia cards (3com and Xircom) network and modem cards.

I manually added the FRITZ!Card drive to the pcmcia card services (fcpcmcia_cs.c) and recompiled. I configured /etc/pcmcia/config to recognize the card. I compiled the fcpcmcia.o module. I compiled capi and isdn modules into the kernel. When I insert the card, the fcpcmcia_cs.o module is unable to determine the IO port of the card. To help understand what is happening, here are the kernel messages when I start the pcmcia card services:

======================

Linux PCMCIA Card Services 3.1.19
  kernel build: 2.2.16 #4 Thu Aug 24 22:56:09 CEST 2000
  options:  [pci] [cardbus] [apm] [pnp]
PCI routing table version 1.0 at 0xfdf40
PnP: PNP BIOS installation structure at 0xc00f6d20
PnP: PNP BIOS version 1.0, entry at f0000:b334, dseg at 400
Intel PCIC probe:
  Ricoh RL5C475 rev 80 PCI-to-CardBus at slot 00:0c, mem 0x68000000
    host opts [0]: [serial irq] [io 3/6/1] [mem 3/6/1] [pci irq 9] [lat 168/176]
 [bus 32/34]
    ISA irqs (default) = 3,4,5,7,10,11,15 PCI status changes
cs: IO port probe 0x1000-0x17ff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x170-0x177 0x220-0x22f 0x330-0x337 0x370-0x377 0x388-0x38f
cs: IO port probe 0x0a00-0x0aff: clean.

======================

and here are the kernel messages when I insert the FRITZ!Card:

======================

cs: memory probe 0xa0000000-0xa0ffffff: clean. CAPI-driver Rev 1.12: Loaded

fcpcmcia: Base adress: 0xC4040050
fcpcmcia: AVM FRITZ!Card PCMCIA driver, revision 0.0
fcpcmcia: Loading...
fcpcmcia: Driver 'fcpcmcia' attached to stack
kcapi: driver fcpcmcia attached fcpcmcia: Loaded.
fcpcmcia_cs: testing i/o 0x140-0x148
fcpcmcia_cs: testing i/o 0x300-0x308
fcpcmcia_cs: RequestIO: No more items

=======================

I was wondering if I need to manually configure the IO port in /etc/pcmcia/config.opts.

Do you have any suggestions?

Thank You.

Marc Beuchat

----------------------------------------------------------------------------

I'll keep you tuned if I hear back from them.

Marc

Next-in-Thread Next Message

Select this message: I have the same problem! Opened up incident with manufacturer

Messages Inline: 1 All Outline: 1 2 All

1. More odd IO request: base 0300 align 0020 by Marc Beuchat, 2000, Aug 26
(_ Idea Bug in fcpcmcia_cs.c for FRITZ!Card pcmcia from AVM by Marc Beuchat, 2000, Aug 27
(_ None Re: Idea: Bug in fcpcmcia_cs.c for FRITZ!Card pcmcia from AVM by Andreas Fink, 2000, Aug 27
(_ Sad Patch didnt work for me by Andreas Fink, 2000, Aug 30
(_ Feedback Re: Patch didnt work for me by Marc Beuchat, 2000, Aug 31

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.


If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO


If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO


Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

Members Subscribe No Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10
[ Edit This Forum ]