Next-in-Thread Next Message

None Too many things changing at once... 

Forum: PCMCIA SCSI Host Adapter Issues
Re: Sad Problem w/aha152x_cs: "soft interrupt lost"(kernel 2.2.13 only!) (Serge Winitzki)
Date: 1999, Dec 07
From: David Hinds <>


according to your log, 3.0.5 worked with irq 4 and io 0x140.

3.1.5 did not work, with irq 3 and io 0x1740.

3.0.14 did not work, with irq 5 and io 0x140.

It doesn't really matter what interrupts appear to be available.  Some
interrupts may not even be physically connected to your PCMCIA bridge. 
Also, if a device is "disabled", that doesn't necessarily mean that
its interrupt is available for use by another arbitrary device.

What I would do is to try to recreate the 3.0.5 situation.  Exclude
irq 3 in your config.opts file, but don't exclude irq 4.  And exclude
the 0x1000-0x17ff io port range.

-- Dave

Next-in-Thread Next Message

Select this message: Too many things changing at once...

Messages Inline: 1 All Outline: 1 2 All

1. Ok thank you, it works now by Serge Winitzki, 1999, Dec 07

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.

If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination

If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages

Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

Members Subscribe No Admin Mode Show Frames Help for HyperNews at 1.10
[ Edit This Forum ]