|
Thanks to all the hints in this newsgroup regarding the HP 820 and the Workbit Ninja SCSI card, I was able to get my new Panasonic KXL-RW10A up and working this afternoon. This uses the same KME scsi card used by the HP 820. [In fact, I read somewhere that the HP is simply a rebadged Panasonic, but I don't know for sure.]
In any event, I used kernel 2.2.14, pcmcia-cs-3.1.11 and the Ninja driver package from http://www.netlab.is.tsukuba.ac.jp/~yokota/izumi/ninja. I used the supplied config info from the Ninja package, changing the version line to:
version "KME ","SCSI-CARD-001","1" Note that the four spaces after KME are very important, otherwise it won't get recognized. [The version line in Fortunato Navaro's posting about the HP 820 had only a single space.] It does work only in 16-bit mode, so you must make sure the little slide switch on the PCMCIA card is set to "16bit". Thanks to all here, and especially Dave, for a great package.
-Bill Randle Tektronix, Inc. billr@exgate.tek.com
|
Messages