Next-in-Thread Next Message

Question Panasonic CD Rom KXL-D720 

Forum: PCMCIA SCSI Host Adapter Issues
Date: 2000, May 04
From: Steve Thomas <>

I've successfully installed RedHat 6.1 on my Toshiba Satellite 110CS and have most everything working. However, I can't get it to recognize my CD ROM which is attached to a scsi pcmcia card. The CD is on the list of devices that should work (tho not directly supported.) It is a Panasonic KXL-D720.

When I insert the card, the following message comes up:

parport0: detected irq 7; use procfs to enable interrupt-driven operation.

Is "procfs" a utility that I can use to make the fix? I can't find it anywhere in my linux set-up. Also, when I run the following commands for the card services, I get the results noted:

#cardctl config
Socket 0:
  Vcc = 5.0, Vpp1 = 0.0, Vpp2 = 0.0
  Interface type is memory and I/O
  IRQ 3 is exclusive, level mode, enabled
  Function 0:
    Config register base = 0x0200
      Option = 0x68, status = 0000, pin = 0000, copy = 0000
    I/O window 1: 0x0100 to 0x011f, 8 bit
Socket 1:
  not configured

#cardctl ident
Socket 0:
  product info: "KME", "KXLC001", "00"
  manfid: 0x0032, 0x0104
  function: 3 (parallel)
Socket 1
  no product info available

What do I need to do to get this thing working? I'm a REAL novice here and, despite reading the PCMCIA How-To, I still haven't a clue as to what to do.

Thanks for the help.


Next-in-Thread Next Message

Messages Inline: 1 All Outline: 1 2 All

1. None You're misunderstanding the "not supported" bit by David Hinds, 2000, May 04
2. More Not Supported by Steve Thomas, 2000, May 04
1. None Not the KXL-D720 by David Hinds, 2000, May 04
(_ Ok OK by Steve Thomas, 2000, May 04

Add Message to: "Panasonic CD Rom KXL-D720"

Members Subscribe Admin Mode Show Frames Help for HyperNews at 1.10