Next-in-Thread Next Message

None No, the interrupt is not the problem 

Forum: PCMCIA SCSI Host Adapter Issues
Re: Question APA-1480 w HD
Re: None Probably no SCSI disk driver (David Hinds)
Re: More alas, the driver is there
Re: None No, not that driver... (David Hinds)
Re: Idea getting closer...?
Date: 2000, Aug 07
From: David Hinds <>

No.  Did you try my previous suggestion?

This card must use irq 10.  It is shared with USB; that is not a
problem.  Your 16-bit cards may use irq's 9 and 11, however, CardBus
cards must use a PCI interrupt, and irq 10 is it for you.

> apa1480_cs: no SCSI devices found

This message means you have a kernel configuration problem: your
kernel has no support for the device(s) attached to the card.  The
apa1480_cb driver is working fine.

-- Dave

Next-in-Thread Next Message

Select this message: No, the interrupt is not the problem

Messages Inline: 1 All Outline: 1 2 All

1. Sad SCSI disk drivers are there by anewman, 2000, Aug 11

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.

If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination

If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages

Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

Members Subscribe No Admin Mode Show Frames Help for HyperNews at 1.10
[ Edit This Forum ]