Next-in-Thread Next Message

Question bus toaster problem with aha152x 

Forum: PCMCIA SCSI Host Adapter Issues
Date: 1999, Dec 14
From: Ted Herman <herman@cs.uiowa.edu>

Hi,

I have a bus toaster SCSI adaptor that works fine on an older (circa 1994) laptop, using the old toaster_cs module for its support. Now I am trying a new laptop, the Casio Fiva, and using Slackware 4 for the software. The bus toaster card doesn't work in this situation. I am wondering from the following messages whether the problem is software or could it be that the Fiva uses nonstandard hardware? The Fiva does properly work with my New Media Ethernet pcmcia card, so I know that at least one pcmcia module works OK.

-- Ted.

Log follows.

Linux version 2.2.6 (root@zap) (gcc version 2.7.2.3) #52 Tue Apr 27 17:00:17 CDT 1999
...
... (first try)
...
Linux PCMCIA Card Services 3.0.9
  kernel build: 2.2.6 #20 Sat Apr 17 23:17:12 CDT 1999
  options:  [pci] [cardbus]
Intel PCIC probe:
  Ricoh RL5C475 PCI-to-CardBus at bus 0 slot 1, mem 0x68000000, 1 socket
    host opts [0]: [isa irq] [io 3/6/1] [mem 3/6/1] [no pci irq] [lat 168/176] [bus 32/34]
    ISA irqs (default) = 3,4,5,7,9,10,12,15 polling interval = 1000 ms
cs: IO port probe 0x1000-0x17ff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x220-0x22f 0x330-0x337 0x388-0x38f 0x398-0x39f 0x480-0x48f 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
cs: memory probe 0xa0000000-0xa0ffffff: clean.
aha152x: processing commandline: ok
aha152x: BIOS test: passed, detected 1 controller(s)
aha152x0: vital data: PORTBASE=0x100, IRQ=3, SCSI ID=7, reconnect=enabled, parity=enabled, synchronous=disabled, delay=100, extended translation=disabled
aha152x: trying software interrupt, ok.
scsi0 : Adaptec 152x SCSI driver; $Revision: 1.7 $
scsi : 1 host.
scsi : aborting command due to timeout : pid 0, scsi0, channel 0, id 0, lun 0 Test Unit Ready 00 00 00 00 00
scsi : aborting command due to timeout : pid 0, scsi0, channel 0, id 0, lun 0 Test Unit Ready 00 00 00 00 00
scsi : aborting command due to timeout : pid 1, scsi0, channel 0, id 1, lun 0 Test Unit Ready 00 00 00 00 00
SCSI device not inactive - rq_status=65535, target=1, pid=1, state=4099, owner=258.
Device busy??? <---- I took out the card
scsi : aborting command due to timeout : pid 1, scsi0, channel 0, id 1, lun 0 Test Unit Ready 00 00 00 00 00
scsi : aborting command due to timeout : pid 2, scsi0, channel 0, id 2, lun 0 Test Unit Ready 00 00 00 00 00
scsi : aborting command due to timeout : pid 2, scsi0, channel 0, id 2, lun 0 Test Unit Ready 00 00 00 00 00
scsi : aborting command due to timeout : pid 3, scsi0, channel 0, id 3, lun 0 Test Unit Ready 00 00 00 00 00
scsi : aborting command due to timeout : pid 3, scsi0, channel 0, id 3, lun 0 Test Unit Ready 00 00 00 00 00
scsi : aborting command due to timeout : pid 4, scsi0, channel 0, id 4, lun 0 Test Unit Ready 00 00 00 00 00
scsi : aborting command due to timeout : pid 4, scsi0, channel 0, id 4, lun 0 Test Unit Ready 00 00 00 00 00
scsi : aborting command due to timeout : pid 5, scsi0, channel 0, id 5, lun 0 Test Unit Ready 00 00 00 00 00
scsi : aborting command due to timeout : pid 5, scsi0, channel 0, id 5, lun 0 Test Unit Ready 00 00 00 00 00
scsi : aborting command due to timeout : pid 6, scsi0, channel 0, id 6, lun 0 Test Unit Ready 00 00 00 00 00
scsi : aborting command due to timeout : pid 6, scsi0, channel 0, id 6, lun 0 Test Unit Ready 00 00 00 00 00
aha152x_cs: no SCSI devices found
...
... second try
...
aha152x: processing commandline: ok
aha152x: BIOS test: passed, detected 1 controller(s)
aha152x0: vital data: PORTBASE=0x100, IRQ=5, SCSI ID=7, reconnect=enabled, parity=enabled, synchronous=disabled, delay=100, extended translation=disabled
aha152x: trying software interrupt, lost.
aha152x: IRQ 5 possibly wrong.  Please verify.
aha152x_cs: no SCSI devices found
scsi : 0 hosts.
...
... third try
...
aha152x: processing commandline: ok
aha152x: BIOS test: passed, detected 1 controller(s)
aha152x0: vital data: PORTBASE=0x100, IRQ=3, SCSI ID=7, reconnect=enabled, parity=enabled, synchronous=disabled, delay=100, extended translation=disabled
aha152x: trying software interrupt, ok.
scsi0 : Adaptec 152x SCSI driver; $Revision: 1.7 $
scsi : 1 host.
scsi : aborting command due to timeout : pid 7, scsi0, channel 0, id 0, lun 0 Test Unit Ready 00 00 00 00 00
scsi : aborting command due to timeout : pid 7, scsi0, channel 0, id 0, lun 0 Test Unit Ready 00 00 00 00 00
scsi : aborting command due to timeout : pid 8, scsi0, channel 0, id 1, lun 0 Test Unit Ready 00 00 00 00 00
scsi : aborting command due to timeout : pid 8, scsi0, channel 0, id 1, lun 0 Test Unit Ready 00 00 00 00 00
scsi : aborting command due to timeout : pid 9, scsi0, channel 0, id 2, lun 0 Test Unit Ready 00 00 00 00 00
scsi : aborting command due to timeout : pid 9, scsi0, channel 0, id 2, lun 0 Test Unit Ready 00 00 00 00 00
scsi : aborting command due to timeout : pid 10, scsi0, channel 0, id 3, lun 0 Test Unit Ready 00 00 00 00 00
scsi : aborting command due to timeout : pid 10, scsi0, channel 0, id 3, lun 0 Test Unit Ready 00 00 00 00 00
scsi : aborting command due to timeout : pid 11, scsi0, channel 0, id 4, lun 0 Test Unit Ready 00 00 00 00 00
scsi : aborting command due to timeout : pid 11, scsi0, channel 0, id 4, lun 0 Test Unit Ready 00 00 00 00 00
scsi : aborting command due to timeout : pid 12, scsi0, channel 0, id 5, lun 0 Test Unit Ready 00 00 00 00 00
scsi : aborting command due to timeout : pid 12, scsi0, channel 0, id 5, lun 0 Test Unit Ready 00 00 00 00 00
scsi : aborting command due to timeout : pid 13, scsi0, channel 0, id 6, lun 0 Test Unit Ready 00 00 00 00 00
scsi : aborting command due to timeout : pid 13, scsi0, channel 0, id 6, lun 0 Test Unit Ready 00 00 00 00 00
aha152x_cs: no SCSI devices found
scsi : 0 hosts.

Next-in-Thread Next Message

Messages Inline: 1 All Outline: 1 2 All

1. None Maybe an interrupt conflict? by David Hinds, 1999, Dec 14
2. Warning Verify the kind of Bus Toaster card by Francisco Escarpa, 2000, Jan 06

Add Message to: "bus toaster problem with aha152x"

Members Subscribe Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10