You can't use the qlogic_cs driver with a CardBus device 

Forum: PCMCIA SCSI Host Adapter Issues
Re: Question: Problem with configure HP 820 Rewriter (Antonio Trujillo Carmona)
Date: 2000, Jan 07
From: David Hinds <dhinds@pcmcia.sourceforge.org>

What PCMCIA driver release are you using? (it will be reported higher up in your system log). If this is really a CardBus-to-SCSI adapter, the qlogic driver will never work. I would then guess that you're using a pre-3.1.0 driver release, since those older drivers could cause kernel traps if you tried to load a 16-bit driver for a CardBus device. Only one 32-bit CardBus-to-SCSI adapter is currently supported under Linux: the Adaptec APA-1480 card. -- Dave

[ Next-in-Thread ]  [ Next Message ] 

Messages Inline: [ 1 ]  [ All ]  Outline: [ 1 ]  [ 2 ]  [ All ] 

1. More: More info... by Dylan Thurston, 2000, Feb 02

[ Add Message ]  to: "You can't use the qlogic_cs driver with a CardBus device"

[ Members ]  [ Subscribe ]  [ Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ]