Hi, I have a Adaptec SlimSCSI 1480a and can not get it to work with Thinkpad i1460 properly. My configraion is, RedHat 6.1, kernel 2.2.12-20 pcmcia 3.1.6 below is the messages from boot up, pcmcia: Starting PCMCIA services: pcmcia: modules kernel: Linux PCMCIA Card Services 3.1.6 kernel: kernel build: 2.2.12-20 #1 Mon Sep 27 10:40:35 EDT 1999 kernel: options: [pci] [cardbus] [apm] kernel: Intel PCIC probe: kernel: O2Micro OZ6812 PCI-to-CardBus at bus 0 slot 19, mem 0x68000000, 1 socket kernel: host opts [0]: [a 24] [b 8d] [c 00] [d 83] [mhpg 18] [fifo 00] [e 2a] [no pci irq] [lat 32/176] [bus 32/34] kernel: ISA irqs (default) = 3,4,7,11,12 polling interval = 1000 ms pcmcia: cardmgr. rc: Starting pcmcia succeeded cardmgr[376]: starting, version is 3.1.6 cardmgr[376]: watching 1 sockets kernel: cs: IO port probe 0x1000-0x17ff: clean. kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x3b8-0x3df 0x408-0x40f 0x480-0x48f 0x4d0-0x4d7 kernel: cs: IO port probe 0x0a00-0x0aff: clean. kernel: cs: cb_alloc(bus 32): vendor 0x9004, device 0x6075 cardmgr[376]: initializing socket 0 cardmgr[376]: socket 0: Adaptec APA-1480 SCSI Host Adapter inet: inetd startup succeeded cardmgr[376]: executing: 'insmod /lib/modules/2.2.12-20/pcmcia/cb_enabler.o' cardmgr[376]: executing: 'insmod /lib/modules/2.2.12-20/pcmcia/apa1480_cb.o reset=1 ultra=1' kernel: cs: cb_config(bus 32) kernel: fn 0 bar 1: io 0x200-0x2ff kernel: fn 0 bar 2: mem 0x60030000-0x60030fff kernel: fn 0 rom: mem 0x60020000-0x6002ffff kernel: apa1480_attach(bus 32, function 0) kernel: (scsi0) <Adaptec PCMCIA SCSI controller> found at PCI 0/0 kernel: (scsi0) Narrow Channel, SCSI ID=7, 3/255 SCBs kernel: (scsi0) Downloading sequencer code... 413 instructions downloaded kernel: scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.1.20/3.2.4 kernel: <Adaptec PCMCIA SCSI controller> kernel: scsi : 1 host. That's it. Non of the devices (Jaz, Zip and a hard drive) was detected after that. Can anyone please help? Thank you in advance. -Alex |
Messages