I'm having problem trying to install a PCMCIA modem...(linux, slackware 7.0) etc/pcmcia/config reflects what HOWTOs says device "serial_cs" class "serial" module "misc/serial", "serial_cs" I specified the manfid got with cardctl status, NO way I even tried specifying "serial_cs" as module ( 'cause there's serial_cs.o in pcmcia where is supposed to stay the file if no path is specified) NO WAY stab says socket 1 is empty ( not true) I'll add the whole boot log I got a null pointer probiung the second socket ( the modem ) , in fact the eth0 works fine but if you do cardctl status you see : Socket 0: 5V 16-bit card present Function 0: ready Socket 1: Socket 0: 5V 16-bit card present Function 0: ready,write protect <--- ???? Also it seems not to find the module serial_cs ( the same for serial) Could you help me ? Thanks a lot ArmyBot
Linux version 2.2.13 (root@RsQgC) (gcc version egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)) #4 Tue Jan 18 18:29:37 CET 2000 Detected 119993660 Hz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 47.82 BogoMIPS Memory: 62996k/65536k available (1112k kernel code, 412k reserved, 956k data, 60k init) CPU: Intel Pentium 75 - 200 stepping 0c Checking 386/387 coupling... OK, FPU using exception 16 error reporting. Checking 'hlt' instruction... OK. Intel Pentium with F0 0F bug - workaround enabled. POSIX conformance testing by UNIFIX PCI: PCI BIOS revision 2.10 entry at 0xf7019 PCI: Using configuration type 1 PCI: Probing PCI hardware Linux NET4.0 for Linux 2.2 Based upon Swansea University Computer Society NET3.039 NET4: Unix domain sockets 1.0 for Linux NET4.0. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP Initializing RT netlink socket Starting kswapd v 1.5 Detected PS/2 Mouse Port. Serial driver version 4.27 with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A pty: 512 Unix98 ptys configured apm: BIOS version 1.2 Flags 0x03 (Driver version 1.9) Real Time Clock Driver v1.09 RAM disk driver initialized: 16 RAM disks of 4096K size loop: registered device at major 7 PCI_IDE: unknown IDE controller on PCI bus 00 device 11, VID=10b9, DID=5219 PCI_IDE: not 100% native mode: will probe irqs later PCI_IDE: simplex device: DMA disabled ide0: PCI_IDE Bus-Master DMA disabled (BIOS) PCI_IDE: simplex device: DMA disabled ide1: PCI_IDE Bus-Master DMA disabled (BIOS) hda: HITACHI_DK223A-81, ATA DISK drive hdc: UJDCD8730, ATAPI CDROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: HITACHI_DK223A-81, 775MB w/128kB Cache, CHS=787/32/63 hdc: ATAPI 8X CD-ROM drive, 128kB Cache Uniform CDROM driver Revision: 2.56 Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 md driver 0.36.6 MAX_MD_DEV=4, MAX_REAL=8 linear personality registered raid0 personality registered Partition check: hda: hda1 hda2 VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 60k freed Adding Swap: 45356k swap-space (priority -1) parport0: PC-style at 0x378 [SPP] lp0: using parport0 (polling). CSLIP: code copyright 1989 Regents of the University of California SLIP: version 0.8.4-NET3.019-NEWTTY-MODULAR (dynamic channels, max=256). SLIP linefill/keepalive option. PPP: version 2.3.7 (demand dialling) PPP line discipline registered. PPP BSD Compression module registered Soundblaster audio driver Copyright (C) by Hannu Savolainen 1993-1996 SB 3.01 detected OK (220) ESS chip ES1688 detected Linux PCMCIA Card Services 3.0.14 kernel build: 2.2.13 #22 Wed Oct 20 17:32:52 CDT 1999 options: [pci] [cardbus] Intel PCIC probe: TI 1130 PCI-to-CardBus at bus 0 slot 4, mem 0x68000000, 2 sockets host opts [0]: [isa irq] [no pci irq] [lat 64/176] [bus 1/5] host opts [1]: [isa irq] [no pci irq] [lat 64/176] [bus 6/10] ISA irqs (scanned) = 7,9,10,11,12 polling interval = 1000 ms cs: IO port probe 0x1000-0x17ff: clean. cs: IO port probe 0x0100-0x04ff: excluding 0x178-0x17f 0x388-0x38f 0x408-0x40f 0x480-0x48f 0x4d0-0x4d7 cs: IO port probe 0x0a00-0x0aff: clean. cs: memory probe 0xa0000000-0xa0ffffff: clean. eth0: NE2000 Compatible: io 0x320, irq 9, hw_addr 00:80:C8:87:E5:2C Unable to handle kernel NULL pointer dereference at virtual address 00000004 current->tss.cr3 = 03d39000, %cr3 = 03d39000 *pde = 00000000 Oops: 0000 CPU: 0 EIP: 0010:[<c484dda8>] EFLAGS: 00010246 eax: 00000000 ebx: c0071280 ecx: c3c897e0 edx: 00000000 esi: 00000000 edi: c3d7b800 ebp: c3c7dad8 esp: c3c7dad0 ds: 0018 es: 0018 ss: 0018 Process cardmgr (pid: 72, process nr: 9, stackpage=c3c7d000) Stack: c3c897e0 c3d7b800 c3c7daec c484e6f3 c3c897e0 00000000 00000000 c3c7db6c c486f2e9 0000002d c3c897e0 00000000 c3c89900 00000000 c486f6e0 4d000000 c486f6e0 c3c7db00 00000000 00000032 00000032 00000032 49434d43 41432041 Call Trace: [<c484e6f3>] [<c486f2e9>] [<c486f6e0>] [<c486f6e0>] [<c01acd1b>] [<c486f4ee>] [<c486f450>] [<c484d589>] [<c4857135>] [<c485b9a6>] [<c486d082>] [<c484e8f5>] [<c484e693>] [<c486f14e>] [<c486f6e4>] [<c486f450>] [<c484f8a8>] [<c486f056>] [<c48625f3>] [<c01c1d89>] [<c4862f89>] [<c01b45af>] [<c01b5ccf>] [<c01b705e>] [<c01b82e3>] [<c01bc8e1>] [<c01bbe63>] [<c01bc053>] [<c011c8ff>] [<c011ca2b>] [<c011c2ef>] [<c011c5a1>] [<c012dc45>] [<c0109ef0>] Code: 8b 56 04 f6 c2 05 75 0d 66 83 7e 0a 00 74 0d f6 46 0c 05 74 ISO 9660 Extensions: RRIP_1991A
|