Interrupt conflict? 

Forum: PCMCIA Serial and Modem Issues
Re: MultiTech MT5634ZLX (Aaron Kaplan)
Date: 2000, Jan 19
From: David Hinds <dhinds@pcmcia.sourceforge.org>

The most likely problem is an interrupt conflict. The easiest way to tell if this is the problem is to do: setserial /dev/modem irq 0 and see if that seems to improve the situation. If so, then you'll need to start excluding interrupts in /etc/pcmcia/config.opts until the problem is resolved. -- Dave

Messages Inline: Outline:

1. Re: Interrupt conflict? by Aaron Kaplan, 2000, Jan 20

(_ Uh-oh by David Hinds, 2000, Jan 20

to: "Interrupt conflict?"