Interrupt conflict? 

Forum: PCMCIA Serial and Modem Issues
Re: Question: MultiTech MT5634ZLX (Aaron Kaplan)
Date: 2000, Jan 19
From: David Hinds <dhinds@pcmcia.sourceforge.org>

The most likely problem is an interrupt conflict. The easiest way to tell if this is the problem is to do: setserial /dev/modem irq 0 and see if that seems to improve the situation. If so, then you'll need to start excluding interrupts in /etc/pcmcia/config.opts until the problem is resolved. -- Dave

[ Next-in-Thread ]  [ Next Message ] 

Messages Inline: [ 1 ]  [ All ]  Outline: [ 1 ]  [ 2 ]  [ All ] 

1. Re: Interrupt conflict? by Aaron Kaplan, 2000, Jan 20

(_ Uh-oh by David Hinds, 2000, Jan 20

[ Add Message ]  to: "Interrupt conflict?"

[ Members ]  [ Subscribe ]  [ Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ]