[ Next-in-Thread ]  [ Next Message ] 

Re: Interrupt conflict?  

Forum: PCMCIA Serial and Modem Issues
Re: Question: MultiTech MT5634ZLX (Aaron Kaplan)
Re: Interrupt conflict? (David Hinds)
Date: 2000, Jan 20
From: Aaron Kaplan kaplan 

> The most likely problem is an interrupt conflict.  The easiest way to
> tell if this is the problem is to do:
> 
>     setserial /dev/modem irq 0

I did that (as suggested in the FAQ), but it didn't change anything.
Also, as I said, a different modem card works fine when assigned the
same IRQ.

-Aaron

[ Next-in-Thread ]  [ Next Message ] 

Messages Inline: [ 1 ]  [ All ]  Outline: [ 1 ]  [ 2 ]  [ All ] 

1. Uh-oh by David Hinds, 2000, Jan 20

[ Add Message ]  to: "Re: Interrupt conflict? "

[ Members ]  [ Subscribe ]  [ Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ]