Next-in-Thread Next Message

Question Nokia CardPhone 1.0 Problem 

Forum: PCMCIA Serial and Modem Issues
Date: 2000, May 18
From: Michael D. md

Hi everyone,

I`m trying to install a Nokia CardPhone 1.0 on a SuSE 6.2 System (Kernel 2.2.10) with the pcmcia package 3.1.14 newly compiled. Mashine is a Toshiba Satellite 2550CDT.

I managed to configure my D-Link 650TX Ethernet Card thanks to your lists here but I`m stuck with the Nokia card.

Here the output:

Serial driver version 4.27 with SHARE_IRQ enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
Linux PCMCIA Card Services 3.1.14
  kernel build: 2.2.10 #7 Sun Aug 15 20:23:47 MEST 1999
  options:  [pci] [cardbus] [apm]
PCI routing table version 1.0 at 0xf0180
Intel PCIC probe: 
  Intel i82365sl B step rev 00 ISA-to-PCMCIA at port 0x3e0 ofs 0x00
    host opts [0]: none
    host opts [1]: none
    ISA irqs (scanned) = 3,4,5,7,10 polling interval = 1000 ms
cs: IO port probe 0x1000-0x17ff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
cs: memory probe 0x0d0000-0x0dffff: clean.
eth0: NE2000 Compatible: io 0x300, irq 3, hw_addr 00:E0:98:77:95:07
tty01 at 0x0100 (irq = 5) is a 16450
register_serial(): autoconfig failed
serial_cs: register_serial() at 0x0108, irq 5 failed

What is the problem here? What means the last line (why 0x0108 and not 0x0100???) What can I try?

Thank you for every hint!

	Michael

Next-in-Thread Next Message

Messages Inline: 1 All Outline: 1 2 All

1. None There is a specific Nokia driver for linux by David Hinds, 2000, May 18
(_ None Yes but it`s for pcmcia 2.9.12... by Michael D., 2000, May 19
(_ None Re: Yes but it`s for pcmcia 2.9.12... by David Hinds, 2000, May 19

Add Message to: "Nokia CardPhone 1.0 Problem"

Members Subscribe Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10