Okay, a bit of mess but here it is. RH 6.2, PCMCIA 3.1.15, EtherFast 10/100 +56K modem. eth cable/connection works great. Take the eth cable out, plug it back in, no problems. But the modem.. If you take the eth cable out, then insert the phone cable into the modem slot, test_modem will always return a poll error or such. The weird thing, test_modem will always work when the eth cable is plugged in! I've tried configuring /etc/pcmcia/config.opts, commenting out the various lines and restarting cardmgr, to no avail. You have to eject the card, plug in the modem cable, then insert back to get the modem recognised. This is bearable but there should be an easier way... David |
Messages