Next-in-Thread Next Message

Question Lucent = wavelan? 

Forum: PCMCIA Serial and Modem Issues
Re: Question MC221 COM One (Tobi Oetiker)
Re: None Well then, just try it... (David Hinds)
Date: 2000, Jan 18
From: Armin Obersteiner fonkie

i just found lucent wavelan cards, would be of no use for a modem or am i wrong ...

i found out the man. ids:

card "Lucent (ex-AT&T) Microelectronics L56xMF"
  manfid 0x11c1, 0x0440
  bind "serial_cs"                   

this entry won't make any difference:

boot:

nel: PCI routing table version 1.0 at 0xfdf60
nel:   00:0a.0 -> irq 9
nel: Intel PCIC probe:
nel:   Ricoh RL5C478 PCI-to-CardBus at bus 0 slot 10, mem 0x68000000, 2 sockets
nel:     host opts [0]: [isa irq] [io 3/6/1] [mem 3/6/1] [pci irq 9] [lat 168/17
nel:     host opts [1]: [isa irq] [io 3/6/1] [mem 3/6/1] [no pci irq] [lat 168/1
nel:     ISA irqs (default) = 3,4,5,7,10,11,12 polling interval = 1000 ms
nel: cs: IO port probe 0x1000-0x17ff: clean.
nel: cs: IO port probe 0x0100-0x04ff: clean.
nel: cs: IO port probe 0x0a00-0x0aff: clean.
nel: cs: cb_alloc(bus 32): vendor 0x11c1, device 0x0440
nel: cs: cb_alloc(bus 35): vendor 0x10b7, device 0x5157  

/proc/pci:        
Bus 32, device   0, function  0:
    Communication controller: Lucent (ex-AT&T) Microelectronics L56xMF (rev 1).
      Medium devsel.  Fast back-to-back capable. 

Jan 18 01:37:20 sack cardmgr[61]: initializing socket 0
Jan 18 01:37:20 sack cardmgr[61]: unsupported card in socket 0
Jan 18 01:37:20 sack cardmgr[61]:   no product info available         

how do i make the cardmgr to recognize and try the serial module ... ???

Thanx

Next-in-Thread Next Message

Messages Inline: 1 All Outline: 1 2 All

1. None Sorry... by David Hinds, 2000, Jan 18

Add Message to: "Lucent = wavelan?"

Members Subscribe Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10