|
i just found lucent wavelan cards, would be of no use for
a modem or am i wrong ...
i found out the man. ids:
card "Lucent (ex-AT&T) Microelectronics L56xMF" manfid 0x11c1, 0x0440 bind "serial_cs" this entry won't make any difference: boot: nel: PCI routing table version 1.0 at 0xfdf60 nel: 00:0a.0 -> irq 9 nel: Intel PCIC probe: nel: Ricoh RL5C478 PCI-to-CardBus at bus 0 slot 10, mem 0x68000000, 2 sockets nel: host opts [0]: [isa irq] [io 3/6/1] [mem 3/6/1] [pci irq 9] [lat 168/17 nel: host opts [1]: [isa irq] [io 3/6/1] [mem 3/6/1] [no pci irq] [lat 168/1 nel: ISA irqs (default) = 3,4,5,7,10,11,12 polling interval = 1000 ms nel: cs: IO port probe 0x1000-0x17ff: clean. nel: cs: IO port probe 0x0100-0x04ff: clean. nel: cs: IO port probe 0x0a00-0x0aff: clean. nel: cs: cb_alloc(bus 32): vendor 0x11c1, device 0x0440 nel: cs: cb_alloc(bus 35): vendor 0x10b7, device 0x5157
/proc/pci:
Bus 32, device 0, function 0:
Communication controller: Lucent (ex-AT&T) Microelectronics L56xMF (rev 1).
Medium devsel. Fast back-to-back capable.
Jan 18 01:37:20 sack cardmgr[61]: initializing socket 0 Jan 18 01:37:20 sack cardmgr[61]: unsupported card in socket 0 Jan 18 01:37:20 sack cardmgr[61]: no product info available how do i make the cardmgr to recognize and try the serial module ... ??? Thanx
|
Messages