Toshiba laptops have been particularly problematic for Linux PCMCIA support, because Toshiba designs their own CardBus bridges. These are somewhat quirky, and not well documented. Use this forum to discuss problems installing and configuring the PCMCIA driver package on Toshiba laptops. Before posting, be sure you've checked any relevant sections of the PCMCIA-HOWTO, such as: Particularly useful bits of information to post include your laptop model; the type(s) of card(s) you are using; your linux distribution; and, of course, any relevant system log messages.

Messages Inline: [ 1 ]  [ All ]  Outline: [ 1 ]  [ 2 ]  [ All ] 

1. Ok: Success with Portege 7020 by Peter Wyss, 1999, Nov 02
2. Ok: Success on Satelite 230CX (If using compatibility mode) by Bas Vermeulen, 1999, Nov 05
3. Sad: Toshiba Satellite Pro 460CDT problems by Richard Gold, 1999, Nov 08
1. Idea: Just un idea ??? by Frederic FENOGLIETTO, 1999, Nov 11
4. Feedback: Linux PCMCIA on Toshiba 2650 XDVD (Bug report) by Guido Ostkamp, 1999, Nov 14
5. Ok: Success: Kingston 10/100 KNE-CB4TX with redhat 6.1 by Stephen Eglen, 1999, Nov 16
6. Question: 3com pcmcia + Tecra 8000 + col 2.3 = no network ability by Andrew, 1999, Nov 16
1. Note: More info about that hang? by David Hinds, 1999, Nov 17
7. Question: Problem on Toshiba Dynabook SS6000 by Barry Yip, 1999, Nov 23
1. Probably an interrupt scan failure by David Hinds, 1999, Nov 23
8. Question: ifconfig crash on a Satellite 4070CDT with D-Link DFE-660 by Kai Hoefler, 1999, Nov 23
1. Resource conflict? by David Hinds, 1999, Nov 23
(_ Feedback: Don't think so by Kai Hoefler, 1999, Nov 24
9. Question: PCMCIA on Toshiba satellite 2590 XDVD + Xircom REM 56G- 100 BTX by Thierry Corlay, 1999, Nov 29
1. Don't try loading modules by hand by David Hinds, 1999, Nov 29
10. Question: 1555CDS 3.0.14(Redhat 6.1) fails at bootup only by Paul Tibbitts, 1999, Dec 05
1. Note: Try the new package by Frederic FENOGLIETTO, 1999, Dec 06
11. Question: BreezeCom/Raylink PCMCIA Does Not Configure on Toshiba Tecra by John Turkovich, 1999, Dec 08
1. Maybe a subtle kernel/module mismatch? by David Hinds, 1999, Dec 10
(_ Question: Configures but Cannot Contact by John Turkovich, 1999, Dec 17
(_ You'll probably need to talk to the ray_cs guy by David Hinds, 1999, Dec 17
12. Sad: System Resource Starvation on tecra 500cdt? by matt t, 1999, Dec 16
1. You've got to look at IO ports, not memory by David Hinds, 1999, Dec 17
13. Question: Weird docking problem w/Tecra 800 & Desk station V plus by Thomas Davis, 1999, Dec 23
1. Interrupt conflict, maybe by David Hinds, 1999, Dec 28
14. Question: 3.1.8 hangup on startup on Tosh Satellite 4030CDT by Honza Jirousek, 1999, Dec 26
1. More: more details by Honza Jirousek, 1999, Dec 28
15. Sad: Redhat 6.1 doesn't see 3com 3c589d Etherlink III card during and after installation (so NEVER) by Roy van der Linden, 1999, Dec 27
16. Question: problem with Xircom RBEM56G 56K modem + 10/100 card on Tecra 8000 by jgu1025, 1999, Dec 30
1. Feedback: Re: Xircom Modem Problems on Tecra 8000 by Andreas Jungmaier, 2000, Feb 08
17. Question: PCMCIA Socket not recongized in a Tecra 700CT by Bernardo Gil, 1999, Dec 30
1. It may be already fixed by David Hinds, 1999, Dec 30
2. Idea: Sounds like irq/configuration problem by maxdude@worldshare.net, 2000, Mar 21
18. Sad: Tecra 8000, RedHat 6.0, and Xircom 2 CE ps by Irene.A.Larko@grc.nasa.gov, 1999, Dec 30
19. Ok: success: 3com MHz 3CCFEM556B and Tecra 8000 by George Betzos, 2000, Jan 13
1. "too much work", etc by David Hinds, 2000, Jan 13
20. Sad: Tecra 700CT + Linksys = "Tx timed out" by Judah Milgram, 2000, Jan 26
1. More: More info on this by Judah Milgram, 2000, Jan 26
(_ ... and more yet by Judah Milgram, 2000, Jan 26
(_ Ok: Yay! by Judah Milgram, 2000, Jan 30
21. More: More on 3.1.8 attempt by Judah Milgram, 2000, Jan 27
22. Question: pcmcia-3.1.10 - Xircom CE3B-100 on Toshiba Satellite 4080XCDT Linux kernel 2.0.37 - can't ping other machines by Paulo Rodrigues, 2000, Feb 02
1. Compare system log messages? by David Hinds, 2000, Feb 02
(_ Feedback: Untitled by Paulo Rodrigues, 2000, Feb 03
(_ That part should not matter by David Hinds, 2000, Feb 03
(_ Ok: It didn't - but works now: removed apm support from the kernel by Paulo Rodrigues, 2000, Feb 04
23. Ok: Success - Installed a Compu-Shack Cardbus Card on a Toschiba Satelite 4030 CDT by Rainer Backes, 2000, Feb 03
24. Question: Ethernetcard and Modem are working _ALMOST_ perfectly by j.m.maurer, 2000, Feb 03
1. I think this detection problem is already fixed by David Hinds, 2000, Feb 03
25. Question: DHCP not working under RedHat 6.1 using 3c574 by Scott Frase, 2000, Feb 08
1. More: addition: static ip does work under RedHat by Scott Frase, 2000, Feb 08
26. Toshiba Satellite 4090xCDT and eth/modem card 3CCFEM556B by Longina Przybyszewska, 2000, Feb 24
1. The importance of using good cables... by David Hinds, 2000, Feb 25
27. Question: problem with satellite 2540cds ToPIC97 by Stef Epardaud, 2000, Feb 28
1. Recent 2.3.* kernels have lots of problems by David Hinds, 2000, Feb 28
1. when do you think it will be fixed? by Stef Epardaud, 2000, Feb 28
2. Question: When did the Kernels change? Can I revert? by Joseph Fannin II, 2000, Mar 02
... 4 Message(s)
28. Question: Tecra 8000 and Xircom realbus 10/100 +modem by Pat Colbeck, 2000, Feb 29
1. More: Me too ... by Rhys Morgan, 2000, Mar 02
(_ The startup problem should be fixed in the 3.1.12 beta by David Hinds, 2000, Mar 02
(_ ... it is. by Rhys Morgan, 2000, Mar 03
29. Question: T8000 & RealPort - lockups, isdn, ... by Rhys Morgan, 2000, Mar 08
30. Ok: success: pcmcia 3.1.12 + kernel 2.3.51 on satellite 2540CDS with xircom REM56G by Stef Epardaud, 2000, Mar 13
31. Idea: Portege 660CDT/ToPIC95-B in dual CardBus/16-bit mode by Donald Hudson, 2000, Mar 31
1. I think it is more tricky than that, unfortunately by David Hinds, 2000, Apr 01
32. Angry: Satellite 4090XDVD and zipslack - NO WAY! till now... by Clarissa Alster, 2000, Mar 31
1. Interrupt probe problem by David Hinds, 2000, Mar 31
2. News: Toshiba 4090 satellite & Red Hat - Almost there! by Clarissa Alster, 2000, Mar 31
33. Question: Tecra 8100 issues (uses ToPic100) by isetford@mindspring.com, 2000, Mar 31
1. Congratulations on picking the hardware combo from hell by David Hinds, 2000, Mar 31
(_ More: Loss of console/keyboard by isetford@mindspring.com, 2000, Apr 04
(_ It is an interrupt probe issue by David Hinds, 2000, Apr 04
35. News: I need revision info for ToPIC bridges... by David Hinds, 2000, Apr 06
1. Feedback: Satellite 4100XCDT ToPIC97 (rev 5) by Dieter Raith, 2000, Apr 07
2. Note: Libretto 100 ToPIC97 Rev 20 by Rob Braun, 2000, Apr 08
3. Sad: IRQ11 conflict causing cardmgr startup problems on 3110CT ToPIC100 ? by Piete Brooks, 2000, Apr 30
1. Something to try by David Hinds, 2000, Jun 09
... 1 Message(s)
4. Toshiba Portege 3015CT (ToPIC97 rev 6) by KevinArima, 2000, Jun 26
36. Question: D-Link DFE-650 in Satellite 4100XCDT by Dieter Raith, 2000, Apr 07
37. Question: worth upgrading? by Dieter Raith, 2000, Apr 07
1. The DFE650 problem should be sorted out soon by David Hinds, 2000, Apr 07
(_ Feedback: The DFE650 problem solved ??? by Jorge Pizarro, 2000, Aug 27
(_ Ok: Fixed with Jochen Friedrich's hint. by Jorge Pizarro, 2000, Aug 28
38. Ok: floppy_cs updated for 2.3.99pre3 by Rob Braun, 2000, Apr 08
39. Sad: Tecra550CDT and 2 ethernets IRQ problem by Fred Beck, 2000, Apr 11
1. Not enough free interrupts, apparently by David Hinds, 2000, Apr 11
(_ More: RE: Not enough free interrupts, apparently by Fred Beck, 2000, Apr 13
(_ More: More information by Fred Beck, 2000, Apr 13
40. Angry: Tecra 8000 + TDK Ethernet/Modem+Suse: Part 2 by Alexei Gorbatov, 2000, Apr 13
1. You are out of luck by David Hinds, 2000, Apr 13
41. Ok: Success with pcmcia 3.1.14 on toshiba 2065cds by Joseph Fannin, 2000, Apr 18
42. Question: Intel Flash series 2+ card not recognized on Toshiba 4080XCDT by Dennis Gerasimov, 2000, May 05
1. Re: Question: Intel Flash series 2+ card not recognized on Toshiba 4080XCDT by David Hinds, 2000, May 06
(_ Re: Question: Intel Flash series 2+ card not recognized on Toshiba 4080XCDT by David Hinds, 2000, May 11
43. Sad: Power settings causing problems with cardbus driver by Arthur Liu, 2000, May 13
1. A partial fix and something to try by David Hinds, 2000, May 26
(_ No more oops - card gets initialised 2nd time by Arthur Liu, 2000, May 28
44. Question: Xircom CBE-10/100 by Rafael Escovar, 2000, May 17
1. That card isn't supposed to work at all... by David Hinds, 2000, May 17
45. Question: Libretto 100 CT with AX88190 chipset card by Stephan von Krawczynski, 2000, May 31
46. Question: Linksys PCMPC200 (cardbus, tulip) and 2.4 in-kernel drivers by Joseph Fannin, 2000, Jun 02
1. Re: Question: Linksys PCMPC200 (cardbus, tulip) and 2.4 in-kernel drivers by David Hinds, 2000, Jun 02
47. Sad: 3.1.15 fatal crash (Toshiba laptop w Xircom CBEII-10/100) by Fabien Tassin, 2000, Jun 02
1. More messages might help by David Hinds, 2000, Jun 03
(_ More: Re: More messages might help by Fabien Tassin, 2000, Jun 03
(_ Something to try by David Hinds, 2000, Jun 09
48. Sad: Toshiba 2105CDS and later pcmcia versions by John Kutil, 2000, Jun 10
1. Maybe more of the usual Toshiba flakiness by David Hinds, 2000, Jun 13
2. More: New information by John Kutil, 2000, Jun 17
3. Ok: Success by John Kutil, 2000, Jun 18
49. Question: PCMCIA Initialization Errors by mike@lonesomegeorge.com, 2000, Jun 27
1. Tecra 700CT work-around by David Hinds, 2000, Jul 05
(_ Ok: Untitled by mike@lonesomegeorge.com, 2000, Jul 30
50. Ok: Trouble and solution to Tecra 700 CT config by Wilson Fletcher, 2000, Jun 28
51. Question: tecra 8000 rbe-100 and lucent modem red hat 6.2! by ritesh patel, 2000, Jun 28
1. Idea: SOLVED! kind of...xircom card OR modem work .. both do not by ritesh patel, 2000, Jun 29
1. Sad: Untitled by ritesh patel, 2000, Jun 30
2. It may be a misfeature of the ltmodem driver by David Hinds, 2000, Jul 05
... 1 Message(s)
52. Question: Cant win with Tecra 700CT by Clinton Cantwell, 2000, Jul 03
1. Re: Question: Cant win with Tecra 700CT by David Hinds, 2000, Jul 05
53. Question: Problems after kernel upgrade by massimo bernaschi, 2000, Jul 10
54. More: problems after kernel update by massimo bernaschi, 2000, Jul 11
1. Ok: "Naive" solution (but it works...) by massimo bernaschi, 2000, Jul 14
55. Question: Problems with Toshiba Tecra 8000 & Deskstation V+ Dockingstation by Markus Lang, 2000, Jul 18
56. Sad: Very strange pcmcia problem by Tony Chaveiro, 2000, Jul 19
57. Question: Can't build 3.1.19 on kernel 2.2.16 on Tecra 8100: "ENODEV undeclared" by Herbert Kornfledt, 2000, Jul 26
1. Your C header files are incomplete by David Hinds, 2000, Jul 26
(_ Ok: Thanks, that seems to have done the trick. by Herbert Kornfledt, 2000, Jul 26
58. Sad: Tecra 8100 & Ositech Jack of Spades - Help by Cristian Pavel, 2000, Aug 05
1. I think this has recently been fixed by David Hinds, 2000, Aug 07
(_ Feedback: Still not working by Cristian Pavel, 2000, Aug 08
(_ Sorry, my mistake... by David Hinds, 2000, Aug 08
1. Feedback: New error - unsupported card now! by Cristian Pavel, 2000, Aug 08
2. Ok: Veni Vidi Vinci - It is working ! by Cristian Pavel, 2000, Aug 08
59. Idea: ToPIC masquerading by Henk Fijnvandraat, 2000, Aug 07
1. A driver upgrade may help by David Hinds, 2000, Aug 07
60. Question: Toshiba Satellite 2675 DVD hangs on first boot after installing RH6.2 by Nicolas Malsch, 2000, Aug 10
1. Probably an interrupt probe problem by David Hinds, 2000, Aug 10
61. Question: Libretto strangeness by Jonathan Yuen, 2000, Aug 22
1. More: correction and more info by Jonathan Yuen, 2000, Aug 22
2. It is a known bug, I'm afraid by David Hinds, 2000, Aug 22
62. Question: Strange problem with a NE2000 card on Satellite 310CDS by Eric Buist, 2000, Aug 24
1. This doesn't sound like a known problem by David Hinds, 2000, Aug 24
2. More: Strange error by Eric Buist, 2000, Aug 26
63. Question: Autonegotiation Failure from dmesg by Scott Monet, 2000, Aug 31
1. It isn't a problem by David Hinds, 2000, Aug 31
(_ Question: No network by Scott Monet, 2000, Aug 31
(_ PCMCIA modules do not show up on that list by David Hinds, 2000, Aug 31

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.

If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO

If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO

Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

[ Members ]  [ Subscribe ]  [ No Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ] 
[ Edit This Forum ]