[ Next-in-Thread ]  [ Next Message ] 

Question: 1555CDS 3.0.14(Redhat 6.1) fails at bootup only 

Forum: PCMCIA on Toshiba laptops
Date: 1999, Dec 05
From: Paul Tibbitts tibbitts 

I have a new 1555CDS (PCI/Cardbus) and have the opposite
problem described in the documentation: at bootup I get
a low beep then high beep.  Unlike my ISA/Cardbus 335CDS,
I don't get a "clean" memory probe report in syslog, only
"excluding ...".  I have tried limiting ranges without
success so far.  I started with all the default 3.0.14
config files from Redhat.

In any case, cards report as "Anonymous memory" and fail
to config if inserted at boot time.  If the same card is
removed and reinserted any time after boot, it will be
configured properly.
If no card is inserted at boot, everything also works fine.

I'm using only older cards (modem, ethernet), no Cardbus
cards, and the Cardbus mode is turned off in the bios
(nothing worked until I disabled it).

Any suggestions will be appreciated.

Paul

[ Next-in-Thread ]  [ Next Message ] 

Select this message: 1555CDS 3.0.14(Redhat 6.1) fails at bootup only

Messages Inline: [ 1 ]  [ All ]  Outline: [ 1 ]  [ 2 ]  [ All ] 

1. Note: Try the new package by Frederic FENOGLIETTO, 1999, Dec 06

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.

If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO

If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO

Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

[ Members ]  [ Subscribe ]  [ No Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ] 
[ Edit This Forum ]