|
hi
i am having some problems using a tecra 500cdt, rh 6.0 and a linksys etherfast cardbus card. according to the PCMCIA How to, i have system resource starvations. see my messages:
Dec 16 17:12:37 localhost kernel: Linux PCMCIA Card Services 3.1.1 Dec 16 17:12:37 localhost kernel: kernel build: 2.2.5-15 #1 Mon Apr 19 22:21:09 EDT 1999 Dec 16 17:12:37 localhost kernel: options: [pci] [cardbus] [apm] Dec 16 17:12:37 localhost kernel: Intel PCIC probe: Dec 16 17:12:37 localhost kernel: Toshiba ToPIC95-B PCI-to-CardBus at bus 0 slot 2, mem 0x68000000, 2 sockets Dec 16 17:12:37 localhost kernel: host opts [0]: [slot 0xf0] [ccr 0x14] [cdr 0x86] [rcr 0x02] [no pci irq] [lat 168/176] [bus 20/20] Dec 16 17:12:37 localhost kernel: host opts [1]: [slot 0xf0] [ccr 0x24] [cdr 0x86] [rcr 0x02] [no pci irq] [lat 168/176] [bus 21/21] Dec 16 17:12:37 localhost kernel: ISA irqs (default) = 4,7,9,10,11 polling interval = 1000 ms Dec 16 17:12:37 localhost cardmgr[1569]: starting, version is 3.1.1 Dec 16 17:12:37 localhost cardmgr[1569]: watching 2 sockets Dec 16 17:12:37 localhost kernel: cs: IO port probe 0x0300-0x0375: clean. now i put in my card and get a high-low beep. it can be identified as you can see:
Dec 16 17:19:22 localhost cardmgr[1569]: initializing socket 1 Dec 16 17:19:22 localhost cardmgr[1569]: socket 1: Linksys EtherFast 10/100 Dec 16 17:19:22 localhost kernel: cs: cb_alloc(bus 21): vendor 0x1011, device 0x0019 Dec 16 17:19:22 localhost cardmgr[1569]: executing: 'insmod /lib/modules/2.2.5-15/pcmcia/cb_enabler.o' Dec 16 17:19:23 localhost cardmgr[1569]: executing: 'insmod /lib/modules/2.2.5-15/pcmcia/tulip_cb.o' Dec 16 17:19:23 localhost kernel: cs: cb_config(bus 21) Dec 16 17:19:23 localhost kernel: cs: could not allocate 128 IO ports for CardBus socket 1 Dec 16 17:19:23 localhost kernel: tulip_cb: RequestIO: Out of resource Dec 16 17:19:24 localhost cardmgr[1569]: get dev info on socket 1 failed: Resource temporarily unavailable i have tried the cardbus suggestion in the HOWTO and expanded my memory range. does anyone have any ideas? thanks matt
|
Messages