[ Next-in-Thread ]  [ Next Message ] 

Question: Weird docking problem w/Tecra 800 & Desk station V plus 

Forum: PCMCIA on Toshiba laptops
Date: 1999, Dec 23
From: Thomas Davis tadavis

Ok, the laptop & pcmcia card services work fine when not docked; when docked, it hangs immediately. (you get the first module loaded; after that, it's dead.)

Undocked: 

00:0b.0 CardBus bridge: Toshiba America Info Systems ToPIC97 (rev 05)
        Subsystem: Unknown device 1179:060f
        Flags: bus master, slow devsel, latency 0
        Bus: primary=00, secondary=14, subordinate=14, sec-latency=0
        16-bit legacy interface ports at 0007

00:0b.1 CardBus bridge: Toshiba America Info Systems ToPIC97 (rev 05)
        Subsystem: Unknown device 1179:060f
        Flags: bus master, slow devsel, latency 0
        Bus: primary=00, secondary=15, subordinate=15, sec-latency=0
        16-bit legacy interface ports at 0007

Docked (these are _added_ to above): 

01:04.0 CardBus bridge: Toshiba America Info Systems ToPIC95 (rev 87)
        Subsystem: Unknown device 1179:060a
        Flags: bus master, slow devsel, latency 0
        Bus: primary=01, secondary=12, subordinate=12, sec-latency=0
        16-bit legacy interface ports at 0007

01:04.1 CardBus bridge: Toshiba America Info Systems ToPIC95 (rev 87)
        Subsystem: Unknown device 1179:060a
        Flags: bus master, slow devsel, latency 0
        Bus: primary=01, secondary=13, subordinate=13, sec-latency=0
        16-bit legacy interface ports at 0007

Any suggestions?

ps. I'm loosing access to the laptop until jan 4; so no great rush on it

[ Next-in-Thread ]  [ Next Message ] 

Messages Inline: [ 0 ]  [ 1 ] 

Interrupt conflict, maybe

Re: Question: Weird docking problem w/Tecra 800 & Desk station V plus (Thomas Davis)
Date: 1999, Dec 28
From: David Hinds <dhinds@pcmcia.sourceforge.org> 

Check the troubleshooting section in the PCMCIA-HOWTO.  I'd guess this
is an interrupt probe problem of some sort.  The HOWTO has some hints
for dealing with these kinds of things.

-- Dave
Weird docking problem w/Tecra 800 & Desk station V plus

[ Add Message ]  to: "Weird docking problem w/Tecra 800 & Desk station V plus"

[ Members ]  [ Subscribe ]  [ Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ]