[ Next-in-Thread ]  [ Next Message ] 

Question: Weird docking problem w/Tecra 800 & Desk station V plus 

Forum: PCMCIA on Toshiba laptops
Date: 1999, Dec 23
From: Thomas Davis tadavis

Ok, the laptop & pcmcia card services work fine when not docked; when docked, it hangs immediately. (you get the first module loaded; after that, it's dead.)

Undocked: 

00:0b.0 CardBus bridge: Toshiba America Info Systems ToPIC97 (rev 05)
        Subsystem: Unknown device 1179:060f
        Flags: bus master, slow devsel, latency 0
        Bus: primary=00, secondary=14, subordinate=14, sec-latency=0
        16-bit legacy interface ports at 0007

00:0b.1 CardBus bridge: Toshiba America Info Systems ToPIC97 (rev 05)
        Subsystem: Unknown device 1179:060f
        Flags: bus master, slow devsel, latency 0
        Bus: primary=00, secondary=15, subordinate=15, sec-latency=0
        16-bit legacy interface ports at 0007

Docked (these are _added_ to above): 

01:04.0 CardBus bridge: Toshiba America Info Systems ToPIC95 (rev 87)
        Subsystem: Unknown device 1179:060a
        Flags: bus master, slow devsel, latency 0
        Bus: primary=01, secondary=12, subordinate=12, sec-latency=0
        16-bit legacy interface ports at 0007

01:04.1 CardBus bridge: Toshiba America Info Systems ToPIC95 (rev 87)
        Subsystem: Unknown device 1179:060a
        Flags: bus master, slow devsel, latency 0
        Bus: primary=01, secondary=13, subordinate=13, sec-latency=0
        16-bit legacy interface ports at 0007

Any suggestions?

ps. I'm loosing access to the laptop until jan 4; so no great rush on it

[ Next-in-Thread ]  [ Next Message ] 

Select this message: Weird docking problem w/Tecra 800 & Desk station V plus

Messages Inline: [ 1 ]  [ All ]  Outline: [ 1 ]  [ 2 ]  [ All ] 

1. Interrupt conflict, maybe by David Hinds, 1999, Dec 28

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.

If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO

If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO

Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

[ Members ]  [ Subscribe ]  [ No Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ] 
[ Edit This Forum ]