[ Next-in-Thread ]  [ Next Message ] 

Ok: success: 3com MHz 3CCFEM556B and Tecra 8000 

Forum: PCMCIA on Toshiba laptops
Date: 2000, Jan 13
From: George Betzos betzos 

I have made a 3COM MHz 3CCFEM556B multifunction card to work
under redhat 6.1 on a Tecra 8000 (366MHz PII).

I had to make a change to the 3c574_cs.c driver program to
get it to allocate the I/O ports otherwise it failed to do so.

Now it runs mostly fine, at least with the 100BASE-TX
connection I am using. Occasionally I may get kernel messages
like that:

eth0: Too much work in interrupt, status 2091. (or 2011)
eth0: interrupt(s) dropped!

but I don't notice any problems using netscape, telnet, etc.

Also, cardmgr initially recognizes it as a memory card, but I
changed the init script to eject it and then reinsert it and
things are fine from that point on.

Please let me know if I should post the fixes.

George

[ Next-in-Thread ]  [ Next Message ] 

Select this message: success: 3com MHz 3CCFEM556B and Tecra 8000

Messages Inline: [ 1 ]  [ All ]  Outline: [ 1 ]  [ 2 ]  [ All ] 

1. "too much work", etc by David Hinds, 2000, Jan 13

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.

If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO

If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO

Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

[ Members ]  [ Subscribe ]  [ No Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ] 
[ Edit This Forum ]