[ Next-in-Thread ]  [ Next Message ] 

More: More info on this 

Forum: PCMCIA on Toshiba laptops
Re: Sad: Tecra 700CT + Linksys = "Tx timed out" (Judah Milgram)
Date: 2000, Jan 26
From: Judah Milgram Jud

Just some followup: 

1) per suggestion seen in similar problem on c.o.l.portable,
   I tried excluding higher ports (0xa00 up) in config.opts.   
   No success, but not surprising since it always chose 0x300  
   anyway.

2) tried to get it up and running on Windows 95. No success,
   but this is likely due to my lack of W-95 expertise.
   It does seem to start up the card (lights on pigtail,
   beeps) but it can't see the network. Anyway it wanted
   files from Windows disk 19 and my set only goes to 13,
   so who knows what's going on there.

3) could the Tx timed out problem stem from problems elsewhere
   in the network? I ask because the whole network is new
   at once, and I haven't confirmed that the desktop (only
   other machine on network) really is able to communicate
   with network. I can ping to the laptop, it loses all 
   packets but I do see the LED on pigtail blink at the ping
   rate.

thanks again,

Judah

milgram@cgpp.com

[ Next-in-Thread ]  [ Next Message ] 

Select this message: More info on this

Messages Inline: [ 1 ]  [ All ]  Outline: [ 1 ]  [ 2 ]  [ All ] 

1. ... and more yet by Judah Milgram, 2000, Jan 26
(_ Ok: Yay! by Judah Milgram, 2000, Jan 30

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.

If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO

If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO

Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

[ Members ]  [ Subscribe ]  [ No Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ] 
[ Edit This Forum ]