[ Next-in-Thread ]  [ Next Message ] 

Ok: Yay! 

Forum: PCMCIA on Toshiba laptops
Re: Sad: Tecra 700CT + Linksys = "Tx timed out" (Judah Milgram)
Re: More: More info on this (Judah Milgram)
Re: ... and more yet (Judah Milgram)
Date: 2000, Jan 30
From: Judah Milgram Jud

Thanks to David Hinds for providing the critical suggestion.

This works: 

 Tecra 700CT
 Linux 2.2.6
 pcmcia 3.0.5 (or 6?)
 PCIC_OPTS="do_pci_scan=0"

Also worked: same as above with Linux 2.0.38 and pcmcia 3.0.9

also: just adding that PCIC option and doing restarting (with rc.pcmcia restart - maybe I also tried "stop"+"start") didn't work, I had to do a cold reboot. I addition, during much of this saga the machine was in resume mode without my noticing it; possibly this was a factor too.

Thanks again Dave!

Judah

[ Next-in-Thread ]  [ Next Message ] 

Select this message: Yay!

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.

If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO

If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO

Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

[ Members ]  [ Subscribe ]  [ No Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ] 
[ Edit This Forum ]