[ Next-in-Thread ]  [ Next Message ] 

More: More on 3.1.8 attempt 

Forum: PCMCIA on Toshiba laptops
Date: 2000, Jan 27
From: Judah Milgram Jud 

Yesterday I wrote

> For what it's worth: tried installing pcmcia 3.1.8, still
> no go. This time I get messages along the lines of
> 
> memory_cs: mem0: anonymous: unknown size
> memory_cs: mem1: anonymous: unknown size

Per suggestion, I went back to capture the system messages
that led up to this. But I can't recreate it!

Now I'm getting (this with 3.1.8)

Linux PCMCIA Card Services 3.1.8
  kernel build: 2.0.38 #6 Wed Jan 12 17:41:28 EST 2000
  options:  [pci] [apm]
Intel PCIC probe: <5>  Bad bridge mapping at 0xffeff000!
not found.
ds: no socket drivers loaded!

and this is what shows up on the tty:

cirrus:/etc/rc.d:ROOT: ./rc.pcmcia start
Starting PCMCIA services: modules/lib/modules/2.0.38/pcmcia/i82365.o: init_modul
e: Device or resource busy
/lib/modules/2.0.38/pcmcia/ds.o: init_module: Device or resource busy
 cardmgr.

I did try excluding 0xf0000-0xfffff in config.opts (and also
0xf0000000-0xffffffff to see if that made a difference).
No change.

I did go back and re-install 3.0.14 to verify same
behavior (suspicion of deteriorating hardware) and saw no
change there from original situation (appears to load,
can't ping out).

more as this develops.

J.

[ Next-in-Thread ]  [ Next Message ] 

Select this message: More on 3.1.8 attempt

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.

If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO

If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO

Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

[ Members ]  [ Subscribe ]  [ No Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ] 
[ Edit This Forum ]