[ Next-in-Thread ]  [ Next Message ] 

Question: pcmcia-3.1.10 - Xircom CE3B-100 on Toshiba Satellite 4080XCDT Linux kernel 2.0.37 - can't ping other machines 

Forum: PCMCIA on Toshiba laptops
Date: 2000, Feb 02
From: Paulo Rodrigues paulor

Hi I looked at all the documentation i found but no mention of problems with such an old kernel; pcmcia compiles and works perfectly on a 2.2.12 kernel; the lights come on and i can ping normally other machines; however, when compiling the same package for the 2.0.37 kernel, make all fails at pnp_bios.c if i config'd it with pnpbios resource checking; i dont think 2.0.37 includes pnp support anyway, but have no idea of the impact not including pnp checking may have... i ran make config again, left pnp out, make all and make install went ok, reviewed /etc/pcmcia/network.opts. then i did /etc/rc.d/rc.pcmcia start (slackware) and it didnt complain, everything detected ok (i think). but, ping wont work... also, after that, i cant remove the modules, /etc/rc.d/rc.pcmcia stop complains that the modules are in use... anyone have any ideas? thanks paulo

[ Next-in-Thread ]  [ Next Message ] 

Select this message: pcmcia-3.1.10 - Xircom CE3B-100 on Toshiba Satellite 4080XCDT Linux kernel 2.0.37 - can't ping other machines

Messages Inline: [ 1 ]  [ All ]  Outline: [ 1 ]  [ 2 ]  [ All ] 

1. Compare system log messages? by David Hinds, 2000, Feb 02
(_ Feedback: Untitled by Paulo Rodrigues, 2000, Feb 03
(_ That part should not matter by David Hinds, 2000, Feb 03
(_ Ok: It didn't - but works now: removed apm support from the kernel by Paulo Rodrigues, 2000, Feb 04

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.

If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO

If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO

Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

[ Members ]  [ Subscribe ]  [ No Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ] 
[ Edit This Forum ]