[ Next-in-Thread ]  [ Next Message ] 

Ok: Success - Installed a Compu-Shack Cardbus Card on a Toschiba Satelite 4030 CDT 

Forum: PCMCIA on Toshiba laptops
Date: 2000, Feb 03
From: Rainer Backes rbackes

... Got it. I installed the latest PCMCIA (3.1.10) on my Satelite 4030 CDT. The OS is Caldera Open Linux 2.3 (free version from magazine CHIP). I tried a lot with BIOS defaults (Mode Automatic), but that didn't work. I had to switch to 'Cardbus/16'. After that the Card came up and works now. Here my addition to pcmcia/config: 

card "COMPU-SHACK FASTline CardBus 10/100 MBit Fast-Ethernet"
  manfid 0x0149,0xc2ab
  bind "tulip_cb"

Thank you very much for your commitment and the help getting our hardware running with LINUX.

Maybe I would had my success event before using the PCMCIA Package of my distribution, if I had switched to the right Bridge mode.

Rainer Backes

[ Next-in-Thread ]  [ Next Message ] 

Select this message: Success - Installed a Compu-Shack Cardbus Card on a Toschiba Satelite 4030 CDT

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.

If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO

If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO

Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

[ Members ]  [ Subscribe ]  [ No Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ] 
[ Edit This Forum ]