Ethernetcard and Modem are working _ALMOST

Question: Ethernetcard and Modem are working _ALMOST_ perfectly

Forum: PCMCIA on Toshiba laptops
Date: 2000, Feb 03
From: j.m.maurer j.m.maurer

Hi! I'm using a pcmcia ethernet card and a modem on a Toshiba 4090CDS. Both cards are working fine, but they only initialize fine after I re-insert them again after startup. I think this must be very siple to correct.... any sugestions are greatly appriciated.
The output of 1) dmesg and 2) /var/run/stab is below, before and after re-inserting both cards
1) dmesg _before_ re-inserting

Linux PCMCIA Card Services 3.0.14 kernel build: 2.2.12-20 #1 Mon Sep 27 10:40:35 EDT 1999 options: [pci] [cardbus] [apm] Intel PCIC probe: Toshiba ToPIC97 PCI-to-CardBus at bus 0 slot 2, mem 0x68000000, 2 sockets host opts [0]: [slot 0xf0] [ccr 0x10] [cdr 0x86] [rcr 0x02] [no pci irq] [lat 168/176] [bus 20/20] host opts [1]: [slot 0xf0] [ccr 0x20] [cdr 0x86] [rcr 0x02] [no pci irq] [lat 168/176] [bus 21/21] ISA irqs (default) = 4,5,7,9,10,12 polling interval = 1000 ms cs: IO port probe 0x1000-0x17ff: clean. cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x4d0-0x4d7 cs: IO port probe 0x0a00-0x0aff: clean. cs: memory probe 0x0d0000-0x0dffff: excluding 0xd0000-0xdffff cs: memory probe 0x0c0000-0x0cffff: excluding 0xc0000-0xcffff memory_cs: mem0: anonymous: unknown size memory_cs: mem1: anonymous: unknown size

2) /var/run/stab _before_ re-inserting

Socket 0: Anonymous Memory 0 memory memory_cs 0 mem0 253 0 Socket 1: Anonymous Memory 1 memory memory_cs 0 mem1 253 16

3) dmesg _after_ re-inserting

Linux PCMCIA Card Services 3.0.14 kernel build: 2.2.12-20 #1 Mon Sep 27 10:40:35 EDT 1999 options: [pci] [cardbus] [apm] Intel PCIC probe: Toshiba ToPIC97 PCI-to-CardBus at bus 0 slot 2, mem 0x68000000, 2 sockets host opts [0]: [slot 0xf0] [ccr 0x10] [cdr 0x86] [rcr 0x02] [no pci irq] [lat 168/176] [bus 20/20] host opts [1]: [slot 0xf0] [ccr 0x20] [cdr 0x86] [rcr 0x02] [no pci irq] [lat 168/176] [bus 21/21] ISA irqs (default) = 4,5,7,9,10,12 polling interval = 1000 ms cs: IO port probe 0x1000-0x17ff: clean. cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x4d0-0x4d7 cs: IO port probe 0x0a00-0x0aff: clean. cs: memory probe 0x0d0000-0x0dffff: excluding 0xd0000-0xdffff cs: memory probe 0x0c0000-0x0cffff: excluding 0xc0000-0xcffff memory_cs: mem0: anonymous: unknown size memory_cs: mem1: anonymous: unknown size eth0: NE2000 Compatible: io 0x300, irq 5, hw_addr 00:C0:0C:03:28:54 tty02 at 0x03e8 (irq = 9) is a 16550A

4) /var/run/stab _after_ re-inserting

Socket 0: Relia RE2408T Ethernet 0 network pcnet_cs 0 eth0 Socket 1: Serial or Modem 1 serial serial_cs 0 ttyS2 4 66

[ Next-in-Thread ] [ Next Message ]

Select this message: Ethernetcard and Modem are working _ALMOST_ perfectly

Messages Inline: [ 1 ] [ All ] Outline: [ 1 ] [ 2 ] [ All ]

1. I think this detection problem is already fixed by David Hinds, 2000, Feb 03

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.

If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO

If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO

Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

[ Members ] [ Subscribe ] [ No Admin Mode ]
[ Show Frames ] [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ]
[ Edit This Forum ]