[ Next-in-Thread ]  [ Next Message ] 

Question: Tecra 8000 and Xircom realbus 10/100 +modem 

Forum: PCMCIA on Toshiba laptops
Date: 2000, Feb 29
From: Pat Colbeck pcolbeck

Hi

I am running SuSE 6.3 on my Tecra8000 with a Xircom RealPort card. I have upgraded the kernel to 2.2.14 and the PCMCIA drivers to 3.1.11. I copied the Suse /sbin/init.d/pcmcia script over the generic one after upgrade as recommened. I have excluded the recommended IRQs for Tecras in config.opts.

On boot it fails loading the i82365 saying "device or resource busy"

Before I upgraded it loaded fine and the ethernet worked OK, the modem didn't though hence the upgrade.

In messages I see this:- 

Intel PCIC probe:
  Bridge register mapping failed: check cb_mem_base settings
not found
ds: no socket drivers loaded!

I have confined the scan to irq 11 in rc.config but that hasn't helped.

Any help appreciated

Pat

[ Next-in-Thread ]  [ Next Message ] 

Select this message: Tecra 8000 and Xircom realbus 10/100 +modem

Messages Inline: [ 1 ]  [ All ]  Outline: [ 1 ]  [ 2 ]  [ All ] 

1. More: Me too ... by Rhys Morgan, 2000, Mar 02
(_ The startup problem should be fixed in the 3.1.12 beta by David Hinds, 2000, Mar 02
(_ ... it is. by Rhys Morgan, 2000, Mar 03

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.

If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO

If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO

Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

[ Members ]  [ Subscribe ]  [ No Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ] 
[ Edit This Forum ]