Next-in-Thread Next Message

Question T8000 & RealPort - lockups, isdn, ... 

Forum: PCMCIA on Toshiba laptops
Date: 2000, Mar 08
From: Rhys Morgan rmorgan


Having loaded the latest (3.1.12) version of the pcmcia card services, I have got past the "...cb_mem_base..." error.

However, this brings a new set of problems:

I can load ethernet (ifup eth0) and access other computers, but unloading (ifdown eth0 or on shutdown) causes the computer to lock up;

I can connect to the analogue modem (cu -lmodem) and issue AT commands, but dialling produces "NO CARRIER" error without making a call;

I would like to know what devices/settings I should set up for the isdn modem - the kernel & kISDN show a list of modems: does one match my card? Does the isdn modem "overlay" the analogue one, as seen in WinNT, such that they must be switched in or out?

Just to recap: I have a Toshiba Tecra8000 with a RealPort card, running a 2.2.9-17 kernel from RedHat. This is alongside WinNT4, as dualboot.

Thank you, Rhys

Next-in-Thread Next Message

Select this message: T8000 & RealPort - lockups, isdn, ...

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.

If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination

If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages

Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

Members Subscribe No Admin Mode Show Frames Help for HyperNews at 1.10
[ Edit This Forum ]