Next-in-Thread Next Message

More Loss of console/keyboard 

Forum: PCMCIA on Toshiba laptops
Re: Question Tecra 8100 issues (uses ToPic100)
Re: None Congratulations on picking the hardware combo from hell (David Hinds)
Date: 2000, Apr 04
From: dabigman

I switched Xircom cards and now am using the RE-100 (16-bit 10/100 card). When I boot I get depmod errors not related to the card (scsi, ide, etc.) and I hear the "good" beeps. As soon as the login prompt appears, I cannot type into the concole. The 3-finger salute also fails. I can boot into single user to modify things but nothing I have tried works. The network is up though because I can telnet into the laptop.

I am using 2.2.14 and 3.1.13 on a Debian system.

Any ideas?

-Ian

Next-in-Thread Next Message

Select this message: Loss of console/keyboard

Messages Inline: 1 All Outline: 1 2 All

1. None It is an interrupt probe issue by David Hinds, 2000, Apr 04

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.


If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO


If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO


Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

Members Subscribe No Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10
[ Edit This Forum ]