More: Loss of console/keyboard 

Forum: PCMCIA on Toshiba laptops
Re: Question: Tecra 8100 issues (uses ToPic100)
Re: Congratulations on picking the hardware combo from hell (David Hinds)
Date: 2000, Apr 04
From: dabigman

I switched Xircom cards and now am using the RE-100 (16-bit 10/100 card). When I boot I get depmod errors not related to the card (scsi, ide, etc.) and I hear the "good" beeps. As soon as the login prompt appears, I cannot type into the concole. The 3-finger salute also fails. I can boot into single user to modify things but nothing I have tried works. The network is up though because I can telnet into the laptop. I am using 2.2.14 and 3.1.13 on a Debian system. Any ideas? -Ian

[ Next-in-Thread ]  [ Next Message ] 

Messages Inline: [ 0 ]  [ 1 ] 

It is an interrupt probe issue Re: More: Loss of console/keyboard Date: 2000, Apr 04 From: David Hinds <dhinds@pcmcia.sourceforge.org>

See the HOWTO section on interrupt probe failures and try the suggested fixes. -- Dave

[ Add Message ]  to: "Loss of console/keyboard"

[ Members ]  [ Subscribe ]  [ Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ]