Next-in-Thread Next Message

Ok 3.1.17 fixes 3110CT ToPIC100 rev 20 problem! 

Forum: PCMCIA on Toshiba laptops
Re: News I need revision info for ToPIC bridges... (David Hinds)
Re: Sad IRQ11 conflict causing cardmgr startup problems on 3110CT ToPIC100 ? (Piete Brooks)
Re: None Something to try (David Hinds)
Date: 2000, Jun 12
From: Piete Brooks pb

The user noticed another problem, in that it would freeze if the machine was booted without a PCMCIA card in. Loading 3.1.17 seems to have fixed both problems!
Adding Swap: 530104k swap-space (priority -1)
maestro: version 0.14 time 10:39:59 Apr 30 2000
maestro: Configuring ESS Maestro 2E found at IO 0xFC00 IRQ 11
maestro:  subvendor id: 0x00011179
maestro: not attempting power management.
maestro: AC97 Codec detected: v: 0x83847609 caps: 0x6940 pwr: 0xf
maestro: 1 channels configured.
eepro100.c:v1.09j-t 9/29/99 Donald Becker
eepro100.c: $Revision: 1.18 $ 1999/12/29 Modified by Andrey V. Savochkin 
eth0: OEM i82557/i82558 10/100 Ethernet at 0xc4060000, 00:00:39:37:B9:1A, IRQ 11.
  Board assembly 000000-000, Physical connectors present: RJ45
  Primary interface chip i82555 PHY #1.
  General self-test: passed.
  Serial sub-system self-test: passed.
  Internal registers self-test: passed.
  ROM checksum self-test: passed (0x04f4518b).
  Receiver lock-up workaround activated.
Linux PCMCIA Card Services 3.1.17
  kernel build: 2.2.14-5.0 #1 Tue Mar 7 20:35:25 EST 2000
  options:  [pci] [cardbus] [apm]
PCI routing table version 1.0 at 0xf0190
  00:0b.0 -> irq 11
Intel PCIC probe: 
  Toshiba ToPIC100 rev 20 PCI-to-CardBus at slot 00:0b, mem 0x68000000
    host opts [0]: [slot 0xf0] [ccr 0x16] [cdr 0x86] [rcr 0xc000000] [pci irq 11] [lat 64/176] [bus 20/20]
    ISA irqs (default) = 4,5,7,9,10,12,15 PCI status changes
cs: IO port probe 0x1000-0x17ff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
Lucent Modem driver version with MANY_PORTS MULTIPORT SHARE_IRQ enabled
ttyS14 at 0x1c00 (irq = 3) is a Lucent
cs: memory probe 0x0d0000-0x0dffff: clean.
hdc: CD-224E, ATAPI CDROM drive

Next-in-Thread Next Message

Add Message to: "3.1.17 fixes 3110CT ToPIC100 rev 20 problem!"

Members Subscribe Admin Mode Show Frames Help for HyperNews at 1.10