Next-in-Thread Next Message

Ok 3.1.17 fixes 3110CT ToPIC100 rev 20 problem! 

Forum: PCMCIA on Toshiba laptops
Re: News I need revision info for ToPIC bridges... (David Hinds)
Re: Sad IRQ11 conflict causing cardmgr startup problems on 3110CT ToPIC100 ? (Piete Brooks)
Re: None Something to try (David Hinds)
Date: 2000, Jun 12
From: Piete Brooks pb

The user noticed another problem, in that it would freeze if the machine was booted without a PCMCIA card in. Loading 3.1.17 seems to have fixed both problems!
Adding Swap: 530104k swap-space (priority -1)
maestro: version 0.14 time 10:39:59 Apr 30 2000
maestro: Configuring ESS Maestro 2E found at IO 0xFC00 IRQ 11
maestro:  subvendor id: 0x00011179
maestro: not attempting power management.
maestro: AC97 Codec detected: v: 0x83847609 caps: 0x6940 pwr: 0xf
maestro: 1 channels configured.
eepro100.c:v1.09j-t 9/29/99 Donald Becker
eepro100.c: $Revision: 1.18 $ 1999/12/29 Modified by Andrey V. Savochkin 
eth0: OEM i82557/i82558 10/100 Ethernet at 0xc4060000, 00:00:39:37:B9:1A, IRQ 11.
  Board assembly 000000-000, Physical connectors present: RJ45
  Primary interface chip i82555 PHY #1.
  General self-test: passed.
  Serial sub-system self-test: passed.
  Internal registers self-test: passed.
  ROM checksum self-test: passed (0x04f4518b).
  Receiver lock-up workaround activated.
Linux PCMCIA Card Services 3.1.17
  kernel build: 2.2.14-5.0 #1 Tue Mar 7 20:35:25 EST 2000
  options:  [pci] [cardbus] [apm]
PCI routing table version 1.0 at 0xf0190
  00:0b.0 -> irq 11
Intel PCIC probe: 
  Toshiba ToPIC100 rev 20 PCI-to-CardBus at slot 00:0b, mem 0x68000000
    host opts [0]: [slot 0xf0] [ccr 0x16] [cdr 0x86] [rcr 0xc000000] [pci irq 11] [lat 64/176] [bus 20/20]
    ISA irqs (default) = 4,5,7,9,10,12,15 PCI status changes
cs: IO port probe 0x1000-0x17ff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
Lucent Modem driver version with MANY_PORTS MULTIPORT SHARE_IRQ enabled
ttyS14 at 0x1c00 (irq = 3) is a Lucent
cs: memory probe 0x0d0000-0x0dffff: clean.
hdc: CD-224E, ATAPI CDROM drive

Next-in-Thread Next Message

Select this message: 3.1.17 fixes 3110CT ToPIC100 rev 20 problem!

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.

If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination

If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages

Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

Members Subscribe No Admin Mode Show Frames Help for HyperNews at 1.10
[ Edit This Forum ]