[ Next-in-Thread ]  [ Next Message ] 

Question: D-Link DFE-650 in Satellite 4100XCDT 

Forum: PCMCIA on Toshiba laptops
Date: 2000, Apr 07
From: Dieter Raith raith

The following problem: Card is detected but I have no access to the network. If I attach it to a 10Mb hub link is on both on the adapter and the hub, if to a 10/100Mb hub link and 10/100 led is on, but no link signal on the hub, if to a 100Mb hub link,half/full and 10/100 is blinking, but no indicator at the hub. A 3Com 589D works immediately. Dieter

[ Next-in-Thread ]  [ Next Message ] 

Select this message: D-Link DFE-650 in Satellite 4100XCDT

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.

If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO

If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO

Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

[ Members ]  [ Subscribe ]  [ No Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ] 
[ Edit This Forum ]