[ Next-in-Thread ]  [ Next Message ] 

Sad: Tecra550CDT and 2 ethernets IRQ problem 

Forum: PCMCIA on Toshiba laptops
Date: 2000, Apr 11
From: Fred Beck FredBeck

I'm trying to get a Tecra550CDT to recognize two ethernet adaptors in preparation of setting it up as a firewall.

I'm running RH 6.1 and have 2 Linksys 10/100 cards (Socket0-PCMPC100, Socket1-EC2T). Both cards show up in /etc/pcmcia/config, and my current copy of /etc/sysconfig/pcmcia reads: 

  PCMCIA=yes
  PCIC=i82365
  PCIC_OPTS="cs_irq=9 irq_list=10,11"
  CORE_OPTS=
  CARDMGR_OPTS="-f"

[I've tried many variations of the above...]

I've set up /etc/pcmcia/network to have two separate entries for : 

  case "$ADDRESS" in
  *,0,*,*)
     <SNIP>
  ;;
  *,1,*,*)
    <SNIP>
  ;;
esac

The basic problem is that I keep getting the resource conflict: "RequestIRQ: Resource in use"

cardmgr seems to detect removal and insertion of the cards just fine. If I remove card0 and start/stop pcmcia, card1 does get recognized and setup on IRQ-10. Basically, cardmgr seems to only want IRQ-10 for both cards.

I'd appreciate any help anyone has to offer. Thanx!

[ Next-in-Thread ]  [ Next Message ] 

Select this message: Tecra550CDT and 2 ethernets IRQ problem

Messages Inline: [ 1 ]  [ All ]  Outline: [ 1 ]  [ 2 ]  [ All ] 

1. Not enough free interrupts, apparently by David Hinds, 2000, Apr 11
(_ More: RE: Not enough free interrupts, apparently by Fred Beck, 2000, Apr 13
(_ More: More information by Fred Beck, 2000, Apr 13

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.

If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO

If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO

Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

[ Members ]  [ Subscribe ]  [ No Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ] 
[ Edit This Forum ]