|
I'm trying to get a Tecra550CDT to recognize two ethernet
adaptors in preparation of setting it up as a firewall.
I'm running RH 6.1 and have 2 Linksys 10/100 cards (Socket0-PCMPC100, Socket1-EC2T). Both cards show up in /etc/pcmcia/config, and my current copy of /etc/sysconfig/pcmcia reads:
PCMCIA=yes PCIC=i82365 PCIC_OPTS="cs_irq=9 irq_list=10,11" CORE_OPTS= CARDMGR_OPTS="-f" [I've tried many variations of the above...] I've set up /etc/pcmcia/network to have two separate entries for :
case "$ADDRESS" in
*,0,*,*)
<SNIP>
;;
*,1,*,*)
<SNIP>
;;
esac
The basic problem is that I keep getting the resource conflict: "RequestIRQ: Resource in use" cardmgr seems to detect removal and insertion of the cards just fine. If I remove card0 and start/stop pcmcia, card1 does get recognized and setup on IRQ-10. Basically, cardmgr seems to only want IRQ-10 for both cards. I'd appreciate any help anyone has to offer. Thanx!
|
Messages