[ Next-in-Thread ]  [ Next Message ] 

More: More information 

Forum: PCMCIA on Toshiba laptops
Re: Sad: Tecra550CDT and 2 ethernets IRQ problem (Fred Beck)
Re: Not enough free interrupts, apparently (David Hinds)
Re: More: RE: Not enough free interrupts, apparently (Fred Beck)
Date: 2000, Apr 13
From: Fred Beck FredBeck

I neglected to give you the output of dmesg: 

  Intel PCIC probe:
    Intel i82365sl B step rev 00 ISA-to-PCMCIA at port 0x3d0 ofs 0x00
      host opts [0]: none
      host opts [1]: none
      ISA irqs (scanned) = 10 polling interval = 1000 ms
  cs: IO port probe 0x1000-0x17ff: clean.
  cs: IO port probe 0x0100-0x04ff: clean.
  cs: IO port probe 0x0a00-0x0aff: clean.
  cs: memory probe 0x0d0000-0x0dffff: clean.
eth0: NE2000 Compatible: io 0x300, irq 10, hw_addr 00:E0:98:02:2D:F5
  pcnet_cs: RequestIRQ: Resource in use

(I'm also curious why I don't see the infamouse ToPic brige that causes so many fits.) 

  -fred

[ Next-in-Thread ]  [ Next Message ] 

Select this message: More information

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.

If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO

If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO

Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

[ Members ]  [ Subscribe ]  [ No Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ] 
[ Edit This Forum ]