Next-in-Thread Next Message

Question Intel Flash series 2+ card not recognized on Toshiba 4080XCDT 

Forum: PCMCIA on Toshiba laptops
Date: 2000, May 05
From: Dennis Gerasimov denger

Hi!

I have toshiba 4080XCDT running redhat 6.1 with kernel 2.2.6 and pcmcia-cs version 3.1.14.

I also have this pesky flash card which is not recognized. The same card is recognized on a different laptop with same version of pcmcia-cs as a 20Mb series 2+ card (although it says 16Mb on the card).

The card also is recognized by windows 98 on the same laptop as MTD-A089 (???).

This is a 5v card, however on Toshiba cardctl config says:

Socket 0:
  Vcc 5.0V  Vpp1 0.0V  Vpp2 0.0V
  interface type is "memory and I/O"
  irq 5 [exclusive] [level]
  function 0:
    config base 0x0400
      option 0x60 status 0x00 copy 0x00
    io 0x0300-0x031f [auto]
Socket 1:
  Vcc 3.3V  Vpp1 3.3V  Vpp2 3.3V
  memory 0x1000-0x1fff @ 0x000e1000 [16bit]

Where the card is in socket 1.

I have tried many things: booting with the card, booting from windows into linux, inserting the card after boot, but nothing helps. I suspect the problem is that it gets the voltage wrong. Any way to force it to 5v?

Thanks for any help!

Next-in-Thread Next Message

Select this message: Intel Flash series 2+ card not recognized on Toshiba 4080XCDT

Messages Inline: 1 All Outline: 1 2 All

1. None Re: Question: Intel Flash series 2+ card not recognized on Toshiba 4080XCDT by David Hinds, 2000, May 06
(_ None Re: Question: Intel Flash series 2+ card not recognized on Toshiba 4080XCDT by David Hinds, 2000, May 11

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.


If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO


If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO


Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

Members Subscribe No Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10
[ Edit This Forum ]