Question: Intel Flash series 2+ card not recognized on Toshiba 4080XCDT 

Forum: PCMCIA on Toshiba laptops
Date: 2000, May 05
From: Dennis Gerasimov denger

Hi! I have toshiba 4080XCDT running redhat 6.1 with kernel 2.2.6 and pcmcia-cs version 3.1.14. I also have this pesky flash card which is not recognized. The same card is recognized on a different laptop with same version of pcmcia-cs as a 20Mb series 2+ card (although it says 16Mb on the card). The card also is recognized by windows 98 on the same laptop as MTD-A089 (???). This is a 5v card, however on Toshiba cardctl config says: Socket 0: Vcc 5.0V Vpp1 0.0V Vpp2 0.0V interface type is "memory and I/O" irq 5 [exclusive] [level] function 0: config base 0x0400 option 0x60 status 0x00 copy 0x00 io 0x0300-0x031f [auto] Socket 1: Vcc 3.3V Vpp1 3.3V Vpp2 3.3V memory 0x1000-0x1fff @ 0x000e1000 [16bit] Where the card is in socket 1. I have tried many things: booting with the card, booting from windows into linux, inserting the card after boot, but nothing helps. I suspect the problem is that it gets the voltage wrong. Any way to force it to 5v? Thanks for any help!

[ Next-in-Thread ]  [ Next Message ] 

Messages Inline: [ 0 ]  [ All ]  Outline: [ 1 ]  [ 2 ]  [ All ] 

Re: Question: Intel Flash series 2+ card not recognized on Toshiba 4080XCDT Re: Question: Intel Flash series 2+ card not recognized on Toshiba 4080XCDT (Dennis Gerasimov) Date: 2000, May 06 From: David Hinds <dhinds@pcmcia.sourceforge.org>

Intel series 2+ flash cards should be dual voltage (capable of operation at either 3.3V or 5V). What does "cardctl config" report on the system where the card works correctly? -- Dave

1. Re: Question: Intel Flash series 2+ card not recognized on Toshiba 4080XCDT by David Hinds, 2000, May 11

[ Add Message ]  to: "Intel Flash series 2+ card not recognized on Toshiba 4080XCDT"

[ Members ]  [ Subscribe ]  [ Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ]