|
Thanks Dave,
No more oops. The driver doesn't find the card first time though - it takes the second try to find the card. The card is now eth1 instead of eth0. I've attached the log messages again.
The setup_delay works... I'll keep that one for now. Thanks for the great work! Cheers, Arthur ----------------------------------------------
May 29 01:40:45 warrior kernel: Linux version 2.2.15 (root@warrior) (gcc version 2.95.2 20000313 (Debian GNU/Linux)) #1 Thu May 4 20:03:49 EST 2000 May 29 01:40:45 warrior kernel: Linux PCMCIA Card Services 3.1.16 May 29 01:40:46 warrior kernel: kernel build: 2.2.15 unknown May 29 01:40:46 warrior kernel: options: [pci] [cardbus] [apm] May 29 01:40:46 warrior kernel: PCI routing table version 1.0 at 0xf8cd0 May 29 01:40:46 warrior kernel: Intel PCIC probe: May 29 01:40:46 warrior kernel: Toshiba ToPIC95-B rev 07 PCI-to-CardBus at slot 00:13, mem 0x68000000 May 29 01:40:46 warrior kernel: host opts [0]: [slot 0xf0] [ccr 0x10] [cdr 0x86] [rcr 0x02] [no pci irq] [lat 168/176] [bus 20/20] May 29 01:40:46 warrior kernel: host opts [1]: [slot 0xf0] [ccr 0x20] [cdr 0x86] [rcr 0x02] [no pci irq] [lat 168/176] [bus 21/21] May 29 01:40:46 warrior kernel: ISA irqs (default) = 3,4,5,7,9,10,12,15 polling interval = 1000 ms May 29 01:40:46 warrior kernel: cs: IO port probe 0x0c00-0x0cff: excluding 0xcf8-0xcff May 29 01:40:46 warrior kernel: cs: IO port probe 0x0800-0x08ff: clean. May 29 01:40:46 warrior kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x220-0x22f 0x330-0x337 0x370-0x37f 0x388-0x38f 0x480-0x48f 0x4d0-0x4d7 May 29 01:40:46 warrior kernel: cs: IO port probe 0x1000-0x17ff: clean. May 29 01:40:46 warrior kernel: cs: IO port probe 0x0a00-0x0aff: clean. May 29 01:40:46 warrior kernel: cs: cb_alloc(bus 20): vendor 0x10b7, device 0x5157 May 29 01:40:46 warrior kernel: 3c59x.c:v0.99Q 5/16/2000 Donald Becker, becker@scyld.com May 29 01:40:46 warrior kernel: http://www.scyld.com/network/vortex.html May 29 01:40:47 warrior kernel: cs: cb_config(bus 20) May 29 01:40:47 warrior kernel: fn 0 bar 1: io 0x100-0x17f May 29 01:40:47 warrior kernel: fn 0 bar 2: mem 0x60021000-0x6002107f May 29 01:40:47 warrior kernel: fn 0 bar 3: mem 0x60020000-0x6002007f May 29 01:40:47 warrior kernel: fn 0 rom: mem 0x60000000-0x6001ffff May 29 01:40:47 warrior kernel: irq 3 May 29 01:40:47 warrior kernel: cs: cb_enable(bus 20) May 29 01:40:47 warrior kernel: bridge io map 0 (flags 0x21): 0x100-0x17f May 29 01:40:47 warrior kernel: bridge mem map 0 (flags 0x1): 0x60000000-0x60021fff May 29 01:40:47 warrior kernel: vortex_attach(device 14:00.0) May 29 01:40:47 warrior kernel: eth0: 3Com 3CCFE575BT Cyclone CardBus at 0x100, 00:00:86:37:43:74, IRQ 3 May 29 01:40:47 warrior kernel: product code 'NV' rev 07 date 03-10-98 May 29 01:40:47 warrior kernel: eth0: CardBus functions mapped 60020000->c6a3b000. May 29 01:40:47 warrior kernel: 8K byte-wide RAM 5:3 Rx:Tx split, MII interface. May 29 01:40:47 warrior kernel: cs: cb_disable(bus 20) May 29 01:40:47 warrior kernel: cs: cb_release(bus 20) May 29 01:40:47 warrior kernel: ***WARNING*** No MII transceivers found! May 29 01:40:47 warrior kernel: Enabling bus-master transmits and whole-frame receives. May 29 01:40:47 warrior kernel: cs: cb_free(bus 20) May 29 01:40:47 warrior kernel: cs: cb_alloc(bus 20): vendor 0x10b7, device 0x5157 May 29 01:40:47 warrior kernel: eth0: command 0x5800 did not complete! May 29 01:40:47 warrior kernel: eth0: command 0x2800 did not complete! May 29 01:40:49 warrior kernel: cs: cb_config(bus 20) May 29 01:40:49 warrior kernel: fn 0 bar 1: io 0x280-0x2ff May 29 01:40:49 warrior kernel: fn 0 bar 2: mem 0x60021000-0x6002107f May 29 01:40:49 warrior kernel: fn 0 bar 3: mem 0x60020000-0x6002007f May 29 01:40:49 warrior kernel: fn 0 rom: mem 0x60000000-0x6001ffff May 29 01:40:49 warrior kernel: irq 3 May 29 01:40:49 warrior kernel: cs: cb_enable(bus 20) May 29 01:40:49 warrior kernel: bridge io map 0 (flags 0x21): 0x280-0x2ff May 29 01:40:49 warrior kernel: bridge mem map 0 (flags 0x1): 0x60000000-0x60021fff May 29 01:40:49 warrior kernel: vortex_attach(device 14:00.0) May 29 01:40:49 warrior kernel: eth1: 3Com 3CCFE575BT Cyclone CardBus at 0x280, 00:00:86:37:43:74, IRQ 3 May 29 01:40:49 warrior kernel: product code 'NV' rev 07 date 03-10-98 May 29 01:40:49 warrior kernel: eth1: CardBus functions mapped 60020000->c6a3d000. May 29 01:40:49 warrior kernel: 8K byte-wide RAM 5:3 Rx:Tx split, MII interface. May 29 01:40:49 warrior kernel: MII transceiver found at address 0, status 782d. May 29 01:40:49 warrior kernel: Enabling bus-master transmits and whole-frame receives.
|