Next-in-Thread Next Message

Question Linksys PCMPC200 (cardbus, tulip) and 2.4 in-kernel drivers 

Forum: PCMCIA on Toshiba laptops
Date: 2000, Jun 02
From: Joseph Fannin II trevorcor

First off, does anyone know anything about the new Linksys PCM200 cardbus card, especially info pertaining to Linux? This card has an integrated network connector (here's a link to a pic). Since my dongle is going south I'll be buying a new card before too long, and this looks cool. I suspect it may be identical internally to the card I have now. Please respond to me personally if you can at fannin.30@osu.edu. Thanks!

Alrighty then. The card I have now (as mentioned above), is a Linksys PCMPC200, which is a Cardbus Fast Ethernet card that uses the tulip_cb driver. I would like to get this working with the drivers in the main 2.4.0test1 kernel tree, preferably built statically into the kernel. Most recently I've tried 2.4.0test1-ac7 .

Since I have had no luck yet building 3.1.15 or a beta against 2.4.0test1, the in-kernel drivers also appear to be my only option.

I suppose my first question should be whether or not this card is supported. It does work with the stock RedHat 6.2 kernel (2.2.14-5.0) and a custom 2.2.15 kernel with pcmcis-cs-3.1.15, using the tulip_cb driver.

My system is a Toshiba 2065cds laptop with a Toshiba ToPIC97 chipset. It is set to "Cardbus/16-bit" in the BIOS, though, and now reports itself as a ToPIC95.

One difference between the 2.2s and 2.4test is that in 2.4 (built statically except for the pcmcia modules), i82365.o refuses to load, complaing of "device or resource busy".

I'm using the RedHat Linuxconf tools by way of the network.opts script provided in the PCMCIA-HOWTO, but for the purpose of troubleshooting I've been doing things manually.

The PCMCIA startup script loads pcmcia_core before it quits with an error. I've figured out that I need to load yenta.o (this replaces i82365.o on Cardbus controllers?) and then pci_socket.o . At this point I get this dumped to my console:

 Using /lib/modules/2.4.0-test1-ac5/pcmcia/pci_socket.o
 Adding cardbus controller 0: Toshiba America Info Systems ToPIC95
 PCI: Enabling device 00:13.0 (0000 -> 0002)
 Yenta IRQ list 06b8, PCI irq11
 Socket status: 30000007
 Adding cardbus controller 1: Toshiba America Info Systems ToPIC95 (#2)
 PCI: Enabling device 00:13.1 (0000 -> 0002)
 Yenta IRQ list 06b8, PCI irq11
 Socket status: 30000020

Now I load ds.o:

 PCI: Enabling device 15:00.0 (0000 -> 0003)

Is this Martin Mares's PCI code? I've seen something like this before relating to Linux-USB.

At this point I start cardmgr. I've done a search and replace on "/etc/pcmcia/options" replacing tulip_cb with xircom_tulip_cb to handle the renaming of this module. Cardmgr gives me a high beep and and then a low beep. So at this point I look in "/var/log/messages":

 Jun  2 03:03:56 hermes cardmgr[557]: starting, version is 3.1.15
 Jun  2 03:03:56 hermes cardmgr[557]: watching 2 sockets
 Jun  2 03:03:56 hermes cardmgr[557]: Card Services release does not match!
 Jun  2 03:03:56 hermes kernel: cs: IO port probe 0x1000-0x17ff: clean. 
 Jun  2 03:03:56 hermes kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x480-0x48f 0x4d0-0x4d7 
 Jun  2 03:03:56 hermes kernel: cs: IO port probe 0x0a00-0x0aff: clean. 
 Jun  2 03:03:56 hermes cardmgr[557]: initializing socket 1
 Jun  2 03:03:56 hermes cardmgr[557]: socket 1: Linksys EtherFast 10/100
 Jun  2 03:03:56 hermes cardmgr[557]: executing: 'modprobe cb_enabler'
 Jun  2 03:03:56 hermes cardmgr[557]: executing: 'modprobe xircom_tulip_cb'
 Jun  2 03:03:57 hermes cardmgr[557]: get dev info on socket 1 failed: Resource temporarily unavailable

Any ideas about what's going on here? I can verify that the modules are loading okay; the problem seems to come when cardmgr tries to bind the driver to the device. The last line in the log is the kicker for me; I have no clue what this means. I suppose it could be resource starvation, but this same system works fine when rebooted to a 2.2.* kernel.

More information about my setup is at the end of this post (and my apology for the length is right here :-).

I see the same behavior with the PCMCIA drivers built statically in the kernel, (with the exception of the module insertion, of course.) I would be grateful for a hint on how to prevent error messages from cardmgr about the non-existent modules, but a working setup be more than enough.

I am a halfway competent user and am willing to compile multiple kernels, packages, etc. (I fancy myself a tester, and usually compile about every other alpha patch to the linux kernel.) I can't write a "Hello World" in C without having to debug it, but I am familiar with basic (and BASIC, ugh) programming. My notebook is not at all mission critical, but I figure if this is a bug, it needs fixing for 2.4-final. So if my system becomes irrevecably wedged, I can just reinstall my distrib.

Thanks for any help!

Joseph Fannin
fannin.30@osu.edu

--
"That's all I have to say about that." -- Forrest Gump

System:

  • Toshiba 2065cds laptop
  • toPIC97 cardbus controller
  • RedHat 6.2
  • Kernel 2.4.0-test1-ac7

dmesg:

Note that I have seen the same behaviour using RedHat's standard 2.91.66 with USB configured out.

Linux version 2.4.0-test1-ac7 (root@hermes) (gcc version pgcc-2.95.2 19991024 (release)) #9 Fri Jun 2 04:50:16 EDT 2000
BIOS-provided physical RAM map:
 e820: 000000000009fc00 @ 0000000000000000 (usable)
 e820: 0000000000000400 @ 000000000009fc00 (reserved)
 e820: 0000000000010000 @ 00000000000f0000 (reserved)
 e820: 0000000001ed0000 @ 0000000000100000 (usable)
 e820: 0000000000010000 @ 0000000001fd0000 (ACPI data)
 e820: 0000000000010000 @ 0000000001fe0000 (reserved)
 e820: 0000000000010000 @ 0000000001ff0000 (reserved)
 e820: 0000000000080000 @ 00000000fef80000 (reserved)
 e820: 0000000000006e00 @ 00000000fffe0000 (reserved)
 e820: 0000000000000200 @ 00000000fffe6e00 (ACPI NVS)
 e820: 0000000000009000 @ 00000000fffe7000 (reserved)
 e820: 0000000000010000 @ 00000000ffff0000 (reserved)
On node 0 totalpages: 8144
zone(0): 4096 pages.
zone(1): 4048 pages.
zone(2): 0 pages.
Kernel command line: auto BOOT_IMAGE=linux ro root=306
Initializing CPU#0
Detected 366602512 Hz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 730.73 BogoMIPS
Memory: 29760k/32576k available (1310k kernel code, 2428k reserved, 103k data, 192k init, 0k highmem)
Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
kmem_create: Poisoning requested, but con given - bdev_cache
Inode-cache hash table entries: 2048 (order: 2, 16384 bytes)
kmem_create: Poisoning requested, but con given - inode_cache
CPU: L1 I Cache: 32K  L1 D Cache: 32K
CPU: AMD-K6(tm) 3D processor stepping 0c
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.36 (20000221) Richard Gooch (rgooch@atnf.csiro.au)
PCI: PCI BIOS revision 2.10 entry at 0xfd1ba, last bus=21
PCI: Using configuration type 1
PCI: Probing PCI hardware
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-ohci.c: USB OHCI at membase 0xc2800000, IRQ 11
usb-ohci.c: NEC Corporation USB
usb.c: new USB bus registered, assigned bus number 1
usb.c: USB new device connect, assigned device number 1
usb.c: kmalloc IF c10bb360, numif 1
usb.c: new device strings: Mfr=0, Product=2, SerialNumber=1
usb.c: USB device number 1 default language ID 0x0
Product: USB OHCI Root Hub
SerialNumber: c2800000
hub.c: USB hub found
hub.c: 2 ports detected
hub.c: ganged power switching
hub.c: standalone hub
hub.c: individual port over-current protection
hub.c: power on to power good time: 510ms
hub.c: hub controller current requirement: 0mA
hub.c: port 1 is removable
hub.c: port 2 is removable
hub.c: local power source is good
hub.c: no over-current condition exists
hub.c: enabling power on all ports
usb.c: hub driver claimed interface c10bb360
Linux NET4.0 for Linux 2.3
Based upon Swansea University Computer Society NET3.039
kmem_create: Poisoning requested, but con given - skbuff_head_cache
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 2048)
apm: BIOS version 1.2 Flags 0x02 (Driver version 1.13)
Starting kswapd v1.6
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
vesafb: framebuffer at 0xf8000000, mapped to 0xc2802000, size 2048k
vesafb: mode is 800x600x16, linelength=1600, pages=1
vesafb: protected mode interface info at c000:7598
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
pty: 256 Unix98 ptys configured
lp0: using parport0 (polling).
loop: registered device at major 7
loop: enabling 8 loop devices
Uniform Multi-Platform E-IDE driver Revision: 6.30
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PCI_IDE: unknown IDE controller on PCI bus 00 device 80, VID=1179, DID=0102
PCI_IDE: chipset revision 52
PCI_IDE: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x1800-0x1807, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0x1808-0x180f, BIOS settings: hdc:pio, hdd:pio
hda: TOSHIBA MK4313MAT, ATA DISK drive
hdc: CD-224E, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 8452080 sectors (4327 MB), CHS=526/255/63, UDMA(33)
hdc: ATAPI 24X CD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.09
Partition check:
 hda: hda1 hda2 < hda5 hda6 >
Floppy drive(s): fd0 is 1.44M
FDC 0 is an 8272A
Serial driver version 5.01 (2000-05-29) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
maestro: version 0.14 time 04:53:23 Jun  2 2000
maestro: Configuring ESS Maestro 2E found at IO 0xFF00 IRQ 11
maestro:  subvendor id: 0x00011179
maestro: not attempting power management.
maestro: AC97 Codec detected: v: 0x414b4d00 caps: 0x0 pwr: 0xf
maestro: 1 channels configured.
usb.c: registered new driver hid
mice: PS/2 mouse device common for all mice
usb.c: registered new driver usblp
usb.c: registered new driver usbscanner
scanner.c: USB Scanner support registered.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 192k freed
Adding Swap: 200772k swap-space (priority -1)
[EXT II FS 0.5b, 95/08/09, bs=4096, fs=4096, gc=31, bpg=32768, ipg=16192, mo=c1dddf28]
Linux PCMCIA Card Services 3.1.11
  options:  [pci] [cardbus] [pm]
ds: no socket drivers loaded!
Adding cardbus controller 0: Toshiba America Info Systems ToPIC95
PCI: Enabling device 00:13.0 (0000 -> 0002)
Yenta IRQ list 06b8, PCI irq11
Socket status: 30000007
Adding cardbus controller 1: Toshiba America Info Systems ToPIC95 (#2)
PCI: Enabling device 00:13.1 (0000 -> 0002)
Yenta IRQ list 06b8, PCI irq11
Socket status: 30000020
cs: cb_alloc(bus 21): vendor 0x1011, device 0x0019
PCI: Enabling device 15:00.0 (0000 -> 0003)
cs: IO port probe 0x1000-0x17ff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x480-0x48f 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.

/proc/pci:

PCI devices found:
  Bus  0, device   0, function  0:
    Host bridge: Toshiba America Info Systems CPU to PCI and PCI to ISA bridge (rev 1).
  Bus  0, device   8, function  0:
    VGA compatible controller: S3 Inc. ViRGE/MX (rev 6).
      Master Capable.  Latency=64.  Min Gnt=4.Max Lat=255.
      Non-prefetchable 32 bit memory at 0xf8000000 [0xfbffffff].
  Bus  0, device  11, function  0:
    USB Controller: NEC Corporation USB (rev 2).
      IRQ 11.
      Master Capable.  Latency=64.  Min Gnt=1.Max Lat=21.
      Non-prefetchable 32 bit memory at 0xf7fff000 [0xf7ffffff].
  Bus  0, device  12, function  0:
    Multimedia audio controller: ESS Technology ES1978 Maestro 2E (rev 16).
      IRQ 11.
      Master Capable.  Latency=64.  Min Gnt=2.Max Lat=24.
      I/O at 0xff00 [0xffff].
  Bus  0, device  16, function  0:
    IDE interface: PCI device 1179:0102 (Toshiba America Info Systems) (rev 52).
      Master Capable.  Latency=64.  Min Gnt=2.Max Lat=40.
      I/O at 0x1800 [0x180f].
  Bus  0, device  19, function  0:
    CardBus bridge: Toshiba America Info Systems ToPIC95 (rev 7).
      IRQ 11.
      Master Capable.  No bursts.  Min Gnt=128.Max Lat=5.
      Non-prefetchable 32 bit memory at 0x10000000 [0x10000fff].
  Bus  0, device  19, function  1:
    CardBus bridge: Toshiba America Info Systems ToPIC95 (#2) (rev 7).
      IRQ 11.
      Master Capable.  No bursts.  Max Lat=5.
      Non-prefetchable 32 bit memory at 0x10001000 [0x10001fff].
  Bus 21, device   0, function  0:
    Ethernet controller: PCI device 1011:0019 (rev 65).
      IRQ 11.
      Master Capable.  No bursts.  Min Gnt=20.Max Lat=40.
      I/O at 0x1400 [0x147f].
      Non-prefetchable 32 bit memory at 0x11000000 [0x110003ff].

./dump_cis:

Socket 0:
  no CIS present

Socket 1:
  manfid 0x0149, 0x0231
  funcid network_adapter [post]
  lan_technology ethernet
  lan_speed 10 mb/sec
  lan_speed 100 mb/sec
  lan_media unshielded_twisted_pair
  vers_1 5.0, "Linksys", "EtherFast 10/100 CardBus PC Card(PCMPC200)",
    "V1.0", ""
  config_cb base 0x002a last_index 0x01
  BAR 1 size 128b [io]
  BAR 2 size 128b [mem]
  BAR 7 size 512b [mem]
  cftable_entry_cb 0x01 [default]
    Vcc Vnom 3300mV
    io_base 1
    irq mask 0xfefc [level] [shared]
    mem_base 2 7

./dump_pirq:

Interrupt routing table found at address 0xfec60:
  Version 1.0, size 0x0070
  Interrupt router is device 00:01.0
  PCI exclusive interrupt mask: 0x0000
  Compatible router: vendor 0x1179 device 0x0602

Device 00:0b.0 (slot 0):
  INTA: link 0x01, irq mask 0x1ef8

Device 00:08.0 (slot 0):
  INTA: link 0x01, irq mask 0x1ef8

Device 00:13.0 (slot 0):
  INTA: link 0x01, irq mask 0x1ef8
  INTB: link 0x01, irq mask 0x1ef8

Device 00:07.0 (slot 0):
  INTA: link 0xff, irq mask 0x0000

Device 00:0c.0 (slot 0):
  INTA: link 0x01, irq mask 0x1ef8

Interrupt router at 00:01.0: 
Could not read router info from /proc/bus/pci/00/01.0.

/usr/src/linux/.config:

#
# Automatically generated by make menuconfig: don't edit
#
CONFIG_X86=y
CONFIG_ISA=y
# CONFIG_SBUS is not set
CONFIG_UID16=y

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y

#
# Processor type and features
#
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M686 is not set
# CONFIG_M686FXSR is not set
CONFIG_MK6=y
# CONFIG_MK7 is not set
# CONFIG_MCRUSOE is not set
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
# CONFIG_X86_FXSR is not set
CONFIG_X86_L1_CACHE_BYTES=32
CONFIG_X86_ALIGNMENT_16=y
CONFIG_X86_TSC=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_SMP is not set
# CONFIG_X86_UP_IOAPIC is not set

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODVERSIONS=y
CONFIG_KMOD=y

#
# General setup
#
CONFIG_NET=y
# CONFIG_VISWS is not set
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_NAMES=y
# CONFIG_MCA is not set
CONFIG_HOTPLUG=y

#
# PCMCIA/CardBus support
#
CONFIG_PCMCIA=m
CONFIG_CARDBUS=y
CONFIG_I82365=y
# CONFIG_TCIC is not set
CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
CONFIG_KCORE_ELF=y
# CONFIG_KCORE_AOUT is not set
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
CONFIG_PM=y
# CONFIG_ACPI is not set
CONFIG_APM=y
# CONFIG_APM_IGNORE_USER_SUSPEND is not set
CONFIG_APM_DO_ENABLE=y
CONFIG_APM_CPU_IDLE=y
CONFIG_APM_DISPLAY_BLANK=y
CONFIG_APM_IGNORE_SUSPEND_BOUNCE=y
CONFIG_APM_RTC_IS_GMT=y
# CONFIG_APM_ALLOW_INTS is not set
# CONFIG_APM_REAL_MODE_POWER_OFF is not set

#
# Parallel port support
#
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
CONFIG_PARPORT_PC_FIFO=y
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_PC_PCMCIA is not set
# CONFIG_PARPORT_AMIGA is not set
# CONFIG_PARPORT_MFC3 is not set
# CONFIG_PARPORT_ATARI is not set
# CONFIG_PARPORT_SUNBPP is not set
# CONFIG_PARPORT_OTHER is not set
CONFIG_PARPORT_1284=y

#
# Plug and Play configuration
#
# CONFIG_PNP is not set
# CONFIG_ISAPNP is not set

#
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_LVM is not set
# CONFIG_BLK_DEV_MD is not set
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_RAID0 is not set
# CONFIG_RAID15_DANGEROUS is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_INITRD is not set

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
# CONFIG_NETLINK is not set
# CONFIG_NETFILTER is not set
# CONFIG_FILTER is not set
CONFIG_UNIX=y
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_IP_ROUTER is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_ALIAS is not set
CONFIG_SYN_COOKIES=y
CONFIG_SKB_LARGE=y
# CONFIG_IPV6 is not set
# CONFIG_KHTTPD is not set
# CONFIG_ATM is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_DECNET is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_BRIDGE is not set
# CONFIG_LLC is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set

#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set
# CONFIG_PHONE_IXJ is not set

#
# ATA/IDE/MFM/RLL support
#
CONFIG_IDE=y

#
# IDE, ATA and ATAPI Block devices
#
CONFIG_BLK_DEV_IDE=y
# CONFIG_BLK_DEV_HD_IDE is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_BLK_DEV_IDEDISK_VENDOR is not set
# CONFIG_BLK_DEV_IDEDISK_FUJITSU is not set
# CONFIG_BLK_DEV_IDEDISK_IBM is not set
# CONFIG_BLK_DEV_IDEDISK_MAXTOR is not set
# CONFIG_BLK_DEV_IDEDISK_QUANTUM is not set
# CONFIG_BLK_DEV_IDEDISK_SEAGATE is not set
# CONFIG_BLK_DEV_IDEDISK_WD is not set
# CONFIG_BLK_DEV_COMMERIAL is not set
# CONFIG_BLK_DEV_TIVO is not set
# CONFIG_BLK_DEV_IDECS is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
# CONFIG_BLK_DEV_ISAPNP is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_IDEPCI_SHARE_IRQ is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_IDEDMA_PCI_AUTO=y
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_PCI_WIP is not set
# CONFIG_IDEDMA_NEW_DRIVE_LISTINGS is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_AEC62XX_TUNING is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_WDC_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD7409 is not set
# CONFIG_AMD7409_OVERRIDE is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_CMD64X_RAID is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_HPT34X_AUTODMA is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_HPT366_FIP is not set
# CONFIG_HPT366_MODE3 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_PIIX_TUNING is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_PDC202XX is not set
# CONFIG_PDC202XX_BURST is not set
# CONFIG_PDC202XX_MASTER is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_VIA82CXXX_TUNING is not set
CONFIG_IDE_CHIPSETS=y
# CONFIG_BLK_DEV_4DRIVES is not set
# CONFIG_BLK_DEV_ALI14XX is not set
# CONFIG_BLK_DEV_DTC2278 is not set
# CONFIG_BLK_DEV_HT6560B is not set
# CONFIG_BLK_DEV_PDC4030 is not set
# CONFIG_BLK_DEV_QD6580 is not set
# CONFIG_BLK_DEV_UMC8672 is not set
CONFIG_IDEDMA_AUTO=y
CONFIG_IDEDMA_IVB=y
CONFIG_BLK_DEV_IDE_MODES=y

#
# SCSI support
#
# CONFIG_SCSI is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set

#
# I2O device support
#
# CONFIG_I2O is not set
# CONFIG_I2O_PCI is not set
# CONFIG_I2O_BLOCK is not set
# CONFIG_I2O_LAN is not set
# CONFIG_I2O_SCSI is not set
# CONFIG_I2O_PROC is not set

#
# Network device support
#
CONFIG_NETDEVICES=y

#
# ARCnet devices
#
# CONFIG_ARCNET is not set
CONFIG_DUMMY=y
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_NET_SB1000 is not set

#
# Ethernet (10 or 100Mbit)
#
# CONFIG_NET_ETHERNET is not set

#
# Ethernet (1000 Mbit)
#
# CONFIG_YELLOWFIN is not set
# CONFIG_ACENIC is not set
# CONFIG_SK98LIN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set

#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set

#
# Token Ring devices
#
# CONFIG_TR is not set
# CONFIG_NET_FC is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set

#
# Wan interfaces
#
# CONFIG_WAN is not set

#
# PCMCIA network device support
#
CONFIG_NET_PCMCIA=y
# CONFIG_PCMCIA_3C589 is not set
# CONFIG_PCMCIA_3C574 is not set
# CONFIG_PCMCIA_FMVJ18X is not set
CONFIG_PCMCIA_PCNET=m
# CONFIG_PCMCIA_NMCLAN is not set
# CONFIG_PCMCIA_SMC91C92 is not set
# CONFIG_PCMCIA_XIRC2PS is not set
# CONFIG_ARCNET_COM20020_CS is not set
# CONFIG_PCMCIA_IBMTR is not set
CONFIG_PCMCIA_XIRTULIP=m
# CONFIG_NET_PCMCIA_RADIO is not set

#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set

#
# IrDA (infrared) support
#
# CONFIG_IRDA is not set

#
# ISDN subsystem
#
# CONFIG_ISDN is not set

#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_SERIAL=y
# CONFIG_SERIAL_CONSOLE is not set
# CONFIG_SERIAL_EXTENDED is not set
# CONFIG_SERIAL_NONSTANDARD is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
CONFIG_PRINTER=y
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set

#
# I2C support
#
# CONFIG_I2C is not set

#
# Mice
#
# CONFIG_BUSMOUSE is not set
CONFIG_MOUSE=y
CONFIG_PSMOUSE=y
# CONFIG_82C710_MOUSE is not set
# CONFIG_PC110_PAD is not set

#
# Joysticks
#
# CONFIG_JOYSTICK is not set
# CONFIG_QIC02_TAPE is not set

#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set

#
# Video For Linux
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set

#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
# CONFIG_DRM is not set
# CONFIG_DRM_TDFX is not set
CONFIG_PCMCIA_SERIAL=m

#
# PCMCIA character device support
#
# CONFIG_PCMCIA_SERIAL_CS is not set
# CONFIG_PCMCIA_SERIAL_CB is not set
# CONFIG_AGP is not set

#
# File systems
#
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_ADFS_FS is not set
# CONFIG_ADFS_FS_RW is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BFS_FS is not set
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
# CONFIG_UMSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_RAMFS is not set
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
# CONFIG_MINIX_FS is not set
# CONFIG_NTFS_FS is not set
# CONFIG_NTFS_RW is not set
# CONFIG_HPFS_FS is not set
CONFIG_PROC_FS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVFS_MOUNT is not set
# CONFIG_DEVFS_DEBUG is not set
CONFIG_DEVPTS_FS=y
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX4FS_RW is not set
# CONFIG_ROMFS_FS is not set
CONFIG_EXT2_FS=y
# CONFIG_SYSV_FS is not set
# CONFIG_SYSV_FS_WRITE is not set
# CONFIG_UDF_FS is not set
# CONFIG_UDF_RW is not set
# CONFIG_UFS_FS is not set
# CONFIG_UFS_FS_WRITE is not set

#
# Network File Systems
#
# CONFIG_CODA_FS is not set
# CONFIG_NFS_FS is not set
# CONFIG_NFS_V3 is not set
# CONFIG_ROOT_NFS is not set
# CONFIG_NFSD is not set
# CONFIG_NFSD_V3 is not set
# CONFIG_SUNRPC is not set
# CONFIG_LOCKD is not set
CONFIG_SMB_FS=y
# CONFIG_NCP_FS is not set
# CONFIG_NCPFS_PACKET_SIGNING is not set
# CONFIG_NCPFS_IOCTL_LOCKING is not set
# CONFIG_NCPFS_STRONG is not set
# CONFIG_NCPFS_NFS_NS is not set
# CONFIG_NCPFS_OS2_NS is not set
# CONFIG_NCPFS_SMALLDOS is not set
# CONFIG_NCPFS_MOUNT_SUBDIR is not set
# CONFIG_NCPFS_NDS_DOMAINS is not set
# CONFIG_NCPFS_NLS is not set
# CONFIG_NCPFS_EXTRAS is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_NLS=y

#
# Native Language Support
#
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set

#
# Console drivers
#
CONFIG_VGA_CONSOLE=y
CONFIG_VIDEO_SELECT=y
# CONFIG_MDA_CONSOLE is not set

#
# Frame-buffer support
#
CONFIG_FB=y
CONFIG_DUMMY_CONSOLE=y
# CONFIG_FB_RIVA is not set
# CONFIG_FB_CLGEN is not set
# CONFIG_FB_PM2 is not set
CONFIG_FB_VESA=y
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_HGA is not set
CONFIG_VIDEO_SELECT=y
# CONFIG_FB_MATROX is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FBCON_ADVANCED is not set
CONFIG_FBCON_CFB8=y
CONFIG_FBCON_CFB16=y
CONFIG_FBCON_CFB24=y
CONFIG_FBCON_CFB32=y
# CONFIG_FBCON_FONTWIDTH8_ONLY is not set
# CONFIG_FBCON_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y

#
# Sound
#
CONFIG_SOUND=y
# CONFIG_SOUND_CMPCI is not set
# CONFIG_SOUND_EMU10K1 is not set
# CONFIG_SOUND_ES1370 is not set
# CONFIG_SOUND_ES1371 is not set
# CONFIG_SOUND_ESSSOLO1 is not set
CONFIG_SOUND_MAESTRO=y
# CONFIG_SOUND_SONICVIBES is not set
# CONFIG_SOUND_TRIDENT is not set
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
# CONFIG_SOUND_VIA82CXXX is not set
# CONFIG_SOUND_OSS is not set

#
# USB support
#
CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_UHCI is not set
# CONFIG_USB_UHCI_ALT is not set
CONFIG_USB_OHCI=y
CONFIG_USB_PRINTER=y
CONFIG_USB_SCANNER=y
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_SERIAL is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_OV511 is not set
# CONFIG_USB_DC2XX is not set
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_STORAGE is not set
# CONFIG_USB_USS720 is not set
# CONFIG_USB_DABUSB is not set
# CONFIG_USB_PLUSB is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_DSBR is not set
CONFIG_USB_HID=y
# CONFIG_USB_WACOM is not set
# CONFIG_USB_WMFORCE is not set
CONFIG_INPUT_KEYBDEV=y
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=800
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=600
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_EVDEV=y

#
# Kernel hacking
#
CONFIG_MAGIC_SYSRQ=y


 

Next-in-Thread Next Message

Messages Inline: 1 All Outline: 1 2 All

1. None Re: Question: Linksys PCMPC200 (cardbus, tulip) and 2.4 in-kernel drivers by David Hinds, 2000, Jun 02

Add Message to: "Linksys PCMPC200 (cardbus, tulip) and 2.4 in-kernel drivers"

Members Subscribe Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10