Next-in-Thread Next Message

None Re: Question: Linksys PCMPC200 (cardbus, tulip) and 2.4 in-kernel drivers 

Forum: PCMCIA on Toshiba laptops
Re: Question Linksys PCMPC200 (cardbus, tulip) and 2.4 in-kernel drivers (Joseph Fannin II)
Date: 2000, Jun 02
From: David Hinds <dhinds@pcmcia.sourceforge.org>

> 
> Since I have had no luck yet building 3.1.15 or a beta against
> 2.4.0test1, the in-kernel drivers also appear to be my only option.

The 01-Jun-00 beta should build against 2.4.0test1.

> The PCMCIA startup script loads pcmcia_core before it quits with an
> error. I've figured out that I need to load yenta.o (this replaces
> i82365.o on Cardbus controllers?) and then pci_socket.o .

Right.  The messages look ok.

> At this point I start cardmgr. I've done a search and replace on
> "/etc/pcmcia/options" replacing tulip_cb with xircom_tulip_cb to handle
> the renaming of this module.

You do not have a Xircom CardBus card; the xircom_tulip_cb driver only
handles Xircom cards.  You want to load the plain tulip driver, and
don't need cb_enabler.

-- Dave

Next-in-Thread Next Message

Add Message to: "Re: Question: Linksys PCMPC200 (cardbus, tulip) and 2.4 in-kernel drivers"

Members Subscribe Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10