I am running Mandrake 7.0 on a Tecra 700CT. I have tried to install PCMCIA services with both the original files and a new version 3.1.15. I continue to receive the following message in my logs: Jun 26 21:09:53 localhost pcmcia: Starting PCMCIA services: Jun 26 21:09:53 localhost pcmcia: modules Jun 26 21:09:53 localhost kernel: Linux PCMCIA Card Services 3.1.9 Jun 26 21:09:53 localhost kernel: kernel build: 2.2.14-15mdk #1 Tue Jan 4 22:24:20 CET 2000 Jun 26 21:09:53 localhost kernel: options: [pci] [cardbus] [apm] Jun 26 21:09:54 localhost kernel: Intel PCIC probe: <5> Bad bridge mapping at 0xffeff000! Jun 26 21:09:54 localhost kernel: not found. Jun 26 21:09:54 localhost pcmcia: /lib/modules/2.2.14-15mdk/pcmcia/i82365.o: Jun 26 21:09:54 localhost pcmcia: init_module: Device or resource busy Jun 26 21:09:54 localhost kernel: ds: no socket drivers loaded! Jun 26 21:09:54 localhost pcmcia: /lib/modules/2.2.14-15mdk/pcmcia/ds.o: Jun 26 21:09:54 localhost pcmcia: cardmgr. Jun 26 21:09:54 localhost pcmcia: init_module: Device or resource busy Jun 26 21:09:54 localhost cardmgr[218]: starting, version is 3.1.9 Jun 26 21:09:54 localhost cardmgr[218]: no pcmcia driver in /proc/devices Jun 26 21:09:54 localhost cardmgr[218]: exiting Jun 26 21:09:54 localhost rc: Starting pcmcia succeeded My config files are as follows: # # Local PCMCIA Configuration File # # System resources available for PCMCIA devices # include port 0x100-0x4ff, port 0x1000-0x17ff include memory 0xd0000-0xdffff include memory 0xa0000000-0xa0ffffff #include memory 0x60000000-0x60ffffff # Extra port range for IBM Token Ring # # Resources we should not use, even if they appear to be available # # First built-in serial port exclude irq 4 # Second built-in serial port exclude irq 3 # First built-in parallel port exclude irq 7 exclude irq 12 exclude irq 5 exclude irq 14 exclude irq 15 # exclude irq 10 # # Examples of options for loadable modules # # To fix sluggish network with IBM ethernet adapter... #module "pcnet_cs" opts "mem_speed=600" # # Options for Xircom Netwave driver... #module "netwave_cs" opts "domain=0x100 scramble_key=0x0" # # Options for IBM Token Ring adapters #module "ibmtr_cs" opts "mmiobase=0xd0000 srambase=0xd4000" I have tried a bunch of different memory ranges with no luck. Startup files are as follows: PCMCIA=yes PCIC=i82365 PCIC_OPTS="cs_irq=9 irq_list=9,11 do_scan=0 pci_csc=1" CORE_OPTS="probe_io=0" CARDMGR_OPTS="-f" Again, I have tried about every combination of these, with no luck. Are the "Bad bridge mapping" and the "no devices in /proc" related, or do I have two problems on my hands? Any ideas, or is this what I get for buying a Toshiba? |
[ Edit This Forum ]