[ Next-in-Thread ]  [ Next Message ] 

Ok: Success: Kingston 10/100 KNE-CB4TX with redhat 6.1 

Forum: PCMCIA on Toshiba laptops
Date: 1999, Nov 16
From: Stephen Eglen stephen.eglen 

hi,
just a quick note to say that I am grateful for the
work put into the PCMCIA package.  I have got my
card (Kingston KNE-CB4TX) working under Toshiba 4100CDT
running redhat 6.1 and pcmcia version 3.0.14

The only small problem I found was that the card isn't
recognised if it is place during the boot process
(I get a time-out error from cs:
cs: socket 0 timed out during reset
)
but if I then do `cardctl eject; cardctl insert'
it all seems to work.

Thanks again for all the hard work!

stephen

[ Next-in-Thread ]  [ Next Message ] 

Select this message: Success: Kingston 10/100 KNE-CB4TX with redhat 6.1

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.

If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO

If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO

Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

[ Members ]  [ Subscribe ]  [ No Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ] 
[ Edit This Forum ]