Next-in-Thread Next Message

Sad Untitled 

Forum: PCMCIA on Toshiba laptops
Re: Question tecra 8000 rbe-100 and lucent modem red hat 6.2! (ritesh patel)
Re: Idea SOLVED! kind of...xircom card OR modem work .. both do not (ritesh patel)
Date: 2000, Jun 30
From: ritesh patel riteshraja

my xicrom networt card and lucent modem both seem to want to use the same irq as shown in the output below:

~ >cardctl config
Socket 0:
  Vcc 3.3V  Vpp1 3.3V  Vpp2 3.3V
  interface type is "cardbus"
  irq 10 [exclusive] [level]
  function 0:
    io 0x0400-0x047f [32bit]
Socket 1:
  not configured
~ >setserial -g -v /dev/ttyS14
/dev/ttyS14, UART: unknown, Port: 0x0400, IRQ: 10
~ >  

when i exclude irq 10 in /etc/pcmcia/config.opts the network card still works but the modem still does not. i have also tried excluding the port by including a line like

exclude port 0x0400

in /etc/pcmcia/config.opts but that did not work either. since there is almost no documentation on the ltmodem package i am left with playing with the pcmcia settings. any suggestions?

Next-in-Thread Next Message

Add Message to: "Untitled"

Members Subscribe Admin Mode Show Frames Help for HyperNews at 1.10