[ Next-in-Thread ]  [ Next Message ] 

Sad: Untitled 

Forum: PCMCIA on Toshiba laptops
Re: Question: tecra 8000 rbe-100 and lucent modem red hat 6.2! (ritesh patel)
Re: Idea: SOLVED! kind of...xircom card OR modem work .. both do not (ritesh patel)
Date: 2000, Jun 30
From: ritesh patel riteshraja

my xicrom networt card and lucent modem both seem to want to use the same irq as shown in the output below: 

~ >cardctl config
Socket 0:
  Vcc 3.3V  Vpp1 3.3V  Vpp2 3.3V
  interface type is "cardbus"
  irq 10 [exclusive] [level]
  function 0:
    io 0x0400-0x047f [32bit]
Socket 1:
  not configured
~ >setserial -g -v /dev/ttyS14
/dev/ttyS14, UART: unknown, Port: 0x0400, IRQ: 10
~ >

when i exclude irq 10 in /etc/pcmcia/config.opts the network card still works but the modem still does not. i have also tried excluding the port by including a line like

exclude port 0x0400

in /etc/pcmcia/config.opts but that did not work either. since there is almost no documentation on the ltmodem package i am left with playing with the pcmcia settings. any suggestions?

[ Next-in-Thread ]  [ Next Message ] 

Select this message: Untitled

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.

If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO

If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO

Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

[ Members ]  [ Subscribe ]  [ No Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ] 
[ Edit This Forum ]