Next-in-Thread Next Message

More problems after kernel update 

Forum: PCMCIA on Toshiba laptops
Date: 2000, Jul 11
From: massimo bernaschi massimo

Following Dave's suggestion, I append three (I hope) relevant
pieces of information. 

The first is the contents of /var/log/messages when the pcmcia
cards are successfully configured; 

the second is the contents of /var/log/messages
for the patched (bad) kernel. This the case in which the 
cards are recognized but NOT configured; 

the third is the .config file of the patched kernel.

Thanks in advance to Dave and anyone that may help!
Massimo

P.S. The dates in the log files have been changed to make
     easier to "diff" the Good and Bad logs

********************* Good log *******************************
 Jul 11 15:00:00 maxlap kernel: Inspecting /boot/System.map-2.2.9-27mdk
Jul 11 15:00:00 maxlap kernel: Loaded 6880 symbols from /boot/System.map-2.2.9-27mdk.
Jul 11 15:00:00 maxlap kernel: Symbols match kernel version 2.2.9.
Jul 11 15:00:00 maxlap kernel: Loaded 49 symbols from 2 modules.
Jul 11 15:00:00 maxlap kernel: Linux version 2.2.9-27mdk (root@locutus.mandrakesoft.com) (gcc version pgcc-2.91.66 19990314 (egcs-1.1.2 release)) #1 Mon Jun 14 16:44:05 CEST 1999 
Jul 11 15:00:00 maxlap kernel: POSIX conformance testing by UNIFIX 
Jul 11 15:00:00 maxlap kernel: mtrr: v1.35 (19990512) Richard Gooch (rgooch@atnf.csiro.au) 
Jul 11 15:00:00 maxlap kernel: PCI: PCI BIOS revision 2.10 entry at 0xfedcd 
Jul 11 15:00:00 maxlap kernel: PCI: Using configuration type 1 
Jul 11 15:00:00 maxlap kernel: PCI: Probing PCI hardware 
Jul 11 15:00:00 maxlap kernel: Linux NET4.0 for Linux 2.2 
Jul 11 15:00:00 maxlap kernel: Based upon Swansea University Computer Society NET3.039 
Jul 11 15:00:00 maxlap kernel: NET4: Unix domain sockets 1.0 for Linux NET4.0. 
Jul 11 15:00:00 maxlap kernel: NET4: Linux TCP/IP 1.0 for NET4.0 
Jul 11 15:00:00 maxlap kernel: IP Protocols: ICMP, UDP, TCP, IGMP 
Jul 11 15:00:00 maxlap kernel: Initializing RT netlink socket 
Jul 11 15:00:00 maxlap kernel: Starting kswapd v 1.5  
Jul 11 15:00:00 maxlap kernel: Detected PS/2 Mouse Port. 
Jul 11 15:00:00 maxlap kernel: Serial driver version 4.27 with MANY_PORTS MULTIPORT SHARE_IRQ enabled 
............................................
Jul 11 15:00:00 maxlap pcmcia: Starting PCMCIA services:
Jul 11 15:00:00 maxlap pcmcia:  modules
Jul 11 15:00:00 maxlap kernel: Linux PCMCIA Card Services 3.0.13 
Jul 11 15:00:00 maxlap kernel:   kernel build: 2.2.9-27mdk #1 Mon Jun 14 16:44:05 CEST 1999 
Jul 11 15:00:00 maxlap kernel:   options:  [pci] [cardbus] [apm] 
Jul 11 15:00:00 maxlap kernel: Intel PCIC probe:  
Jul 11 15:00:00 maxlap kernel:   Intel i82365sl B step ISA-to-PCMCIA at port 0x3e0 ofs 0x00, 2 sockets 
Jul 11 15:00:00 maxlap kernel:     host opts [0]: none 
Jul 11 15:00:00 maxlap kernel:     host opts [1]: none 
Jul 11 15:00:00 maxlap kernel:     ISA irqs (default) = 3,4,5,7,9,10 polling interval = 1000 ms 
Jul 11 15:00:00 maxlap pcmcia:  cardmgr.
Jul 11 15:00:00 maxlap rc: Starting pcmcia succeeded
Jul 11 15:00:00 maxlap cardmgr[263]: starting, version is 3.1.17
Jul 11 15:00:00 maxlap cardmgr[263]: watching 2 sockets
Jul 11 15:00:00 maxlap kernel: cs: IO port probe 0x1000-0x17ff: clean. 
Jul 11 15:00:00 maxlap kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x4d0-0x4d7 
Jul 11 15:00:00 maxlap kernel: cs: memory probe 0x0d0000-0x0dffff: clean. 
Jul 11 15:00:00 maxlap cardmgr[263]: Card Services release does not match
Jul 11 15:00:00 maxlap cardmgr[263]: initializing socket 0
Jul 11 15:00:00 maxlap cardmgr[263]: socket 0: RPTI EP401 Ethernet
Jul 11 15:00:00 maxlap inet: inetd startup succeeded
Jul 11 15:00:00 maxlap cardmgr[263]: executing: 'modprobe 8390'
Jul 11 15:00:00 maxlap cardmgr[263]: executing: 'modprobe pcnet_cs'
Jul 11 15:00:00 maxlap kernel: eth0: NE2000 Compatible: io 0x300, irq 3, hw_addr 00:40:95:40:3A:1E 
Jul 11 15:00:00 maxlap cardmgr[263]: executing: './network start eth0'
Jul 11 15:00:00 maxlap cardmgr[263]: initializing socket 1
Jul 11 15:00:00 maxlap cardmgr[263]: socket 1: Serial or Modem
Jul 11 15:00:00 maxlap cardmgr[263]: executing: 'modprobe serial_cs'
Jul 11 15:00:00 maxlap kernel: tty01 at 0x02f8 (irq = 5) is a 16550A 
Jul 11 15:00:00 maxlap cardmgr[263]: executing: './serial start ttyS1'

************************ Bad Log *****************************
Jul 11 15:00:00 maxlap kernel: Inspecting /boot/System.map-2.2.9-27mdk
Jul 11 15:00:00 maxlap kernel: Loaded 6880 symbols from /boot/System.map-2.2.9-27mdk.
Jul 11 15:00:00 maxlap kernel: Symbols match kernel version 2.2.9.
Jul 11 15:00:00 maxlap kernel: Loaded 49 symbols from 2 modules.
Jul 11 15:00:00 maxlap kernel: Linux version 2.2.9-27mdk (root@maxlap.iac.rm.cnr.it) (gcc version pgcc-2.91.66 19990314 (egcs-1.1.2 release)) #2 Fri Jul 7 23:28:26 CEST 2000 
Jul 11 15:00:00 maxlap kernel: POSIX conformance testing by UNIFIX 
Jul 11 15:00:00 maxlap kernel: mtrr: v1.35 (19990512) Richard Gooch (rgooch@atnf.csiro.au) 
Jul 11 15:00:00 maxlap kernel: PCI: PCI BIOS revision 2.10 entry at 0xfedcd 
Jul 11 15:00:00 maxlap kernel: PCI: Using configuration type 1 
Jul 11 15:00:00 maxlap kernel: PCI: Probing PCI hardware 
Jul 11 15:00:00 maxlap kernel: Linux NET4.0 for Linux 2.2 
Jul 11 15:00:00 maxlap kernel: Based upon Swansea University Computer Society NET3.039 
Jul 11 15:00:00 maxlap kernel: NET4: Unix domain sockets 1.0 for Linux NET4.0. 
Jul 11 15:00:00 maxlap kernel: NET4: Linux TCP/IP 1.0 for NET4.0 
Jul 11 15:00:00 maxlap kernel: IP Protocols: ICMP, UDP, TCP, IGMP 
Jul 11 15:00:00 maxlap kernel: Initializing RT netlink socket 
Jul 11 15:00:00 maxlap kernel: Starting kswapd v 1.5  
Jul 11 15:00:00 maxlap kernel: Detected PS/2 Mouse Port. 
Jul 11 15:00:00 maxlap kernel: Serial driver version 4.27 with MANY_PORTS MULTIPORT SHARE_IRQ enabled 
.....................................
Jul 11 15:00:00 maxlap pcmcia: Starting PCMCIA services:
Jul 11 15:00:00 maxlap pcmcia:  modules
Jul 11 15:00:00 maxlap kernel: Linux PCMCIA Card Services 3.1.17 
Jul 11 15:00:00 maxlap kernel:   kernel build: 2.2.9-27mdk #2 Fri Jul 7 23:28:26 CEST 2000 
Jul 11 15:00:00 maxlap kernel:   options:  [pci] [apm] 
Jul 11 15:00:00 maxlap kernel: PCI routing table version 1.0 at 0xf0180 
Jul 11 15:00:00 maxlap kernel: Intel PCIC probe:  
Jul 11 15:00:00 maxlap kernel:   Intel i82365sl B step rev 00 ISA-to-PCMCIA at port 0x3e0 ofs 0x00 
Jul 11 15:00:00 maxlap kernel:     host opts [0]: none 
Jul 11 15:00:00 maxlap kernel:     host opts [1]: none 
Jul 11 15:00:00 maxlap kernel:     ISA irqs (default) = 3,4,5,7,9,10 polling interval = 1000 ms 
Jul 11 15:00:00 maxlap pcmcia:  cardmgr.
Jul 11 15:00:00 maxlap rc: Starting pcmcia succeeded
Jul 11 15:00:00 maxlap cardmgr[263]: starting, version is 3.1.17
Jul 11 15:00:00 maxlap cardmgr[263]: watching 2 sockets
Jul 11 15:00:00 maxlap kernel: cs: IO port probe 0x1000-0x17ff: clean. 
Jul 11 15:00:00 maxlap kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x4d0-0x4d7 
Jul 11 15:00:00 maxlap cardmgr[263]: initializing socket 0
Jul 11 15:00:00 maxlap kernel: cs: memory probe 0x0d0000-0x0dffff: clean. 
Jul 11 15:00:00 maxlap cardmgr[263]: socket 0: RPTI EP401 Ethernet
Jul 11 15:00:00 maxlap inet: inetd startup succeeded
Jul 11 15:00:00 maxlap cardmgr[263]: executing: 'modprobe 8390'
Jul 11 15:00:00 maxlap cardmgr[263]: executing: 'modprobe pcnet_cs'
Jul 11 15:00:00 maxlap cardmgr[263]: bind 'pcnet_cs' to socket 0 failed: Operation not permitted
Jul 11 15:00:00 maxlap cardmgr[263]: initializing socket 1
Jul 11 15:00:00 maxlap cardmgr[263]: socket 1: Serial or Modem
Jul 11 15:00:00 maxlap cardmgr[263]: executing: 'modprobe serial_cs'
Jul 11 15:00:00 maxlap cardmgr[263]: bind 'serial_cs' to socket 1 failed: Operation not permitted

************************* .config file ***********************
#
# Automatically generated make config: don't edit
#

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y

#
# Processor type and features
#
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
CONFIG_M686=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_TSC=y
CONFIG_X86_GOOD_APIC=y
# CONFIG_1GB is not set
CONFIG_2GB=y
CONFIG_MATH_EMULATION=y
CONFIG_MTRR=y
# CONFIG_SMP is not set
CONFIG_PERF=y

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODVERSIONS=y
CONFIG_KMOD=y

#
# General setup
#
CONFIG_NET=y
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_QUIRKS=y
CONFIG_PCI_OPTIMIZE=y
CONFIG_PCI_OLD_PROC=y
# CONFIG_MCA is not set
# CONFIG_VISWS is not set
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_SYSCTL=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
CONFIG_BINFMT_JAVA=m
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
# CONFIG_PARPORT_OTHER is not set
CONFIG_APM=y
# CONFIG_APM_IGNORE_USER_SUSPEND is not set
# CONFIG_APM_DO_ENABLE is not set
# CONFIG_APM_CPU_IDLE is not set
# CONFIG_APM_DISPLAY_BLANK is not set
# CONFIG_APM_IGNORE_MULTIPLE_SUSPEND is not set
# CONFIG_APM_IGNORE_SUSPEND_BOUNCE is not set
CONFIG_APM_RTC_IS_GMT=y
# CONFIG_APM_ALLOW_INTS is not set

#
# Plug and Play support
#
CONFIG_PNP=y
CONFIG_PNP_PARPORT=m

#
# Block devices
#
CONFIG_BLK_DEV_FD=y
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECD=y
CONFIG_IDECD_SLOTS=y
CONFIG_BLK_DEV_IDETAPE=m
CONFIG_BLK_DEV_IDEFLOPPY=m
CONFIG_BLK_DEV_IDESCSI=m
CONFIG_BLK_DEV_CMD640=y
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
CONFIG_BLK_DEV_RZ1000=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_AEC6210=y
# CONFIG_IDEDMA_AUTO is not set
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_VIA82C586 is not set
# CONFIG_BLK_DEV_CMD646 is not set
CONFIG_BLK_DEV_ALI15X3=y
CONFIG_BLK_DEV_CY82C693=y
CONFIG_BLK_DEV_PDC20246=y
CONFIG_BLK_DEV_PDC20262=y
CONFIG_BLK_DEV_PDC202XX=y
CONFIG_BLK_DEV_HPT343=y
# CONFIG_IDE_CHIPSETS is not set

#
# Additional Block Devices
#
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=m
CONFIG_MD_STRIPED=m
CONFIG_MD_MIRRORING=m
CONFIG_MD_RAID5=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_BLK_DEV_XD=m
CONFIG_BLK_DEV_DAC960=m
CONFIG_PARIDE_PARPORT=m
CONFIG_PARIDE=m

#
# Parallel IDE high-level drivers
#
CONFIG_PARIDE_PD=m
CONFIG_PARIDE_PCD=m
CONFIG_PARIDE_PF=m
CONFIG_PARIDE_PT=m
CONFIG_PARIDE_PG=m

#
# Parallel IDE protocol modules
#
CONFIG_PARIDE_ATEN=m
CONFIG_PARIDE_BPCK=m
CONFIG_PARIDE_COMM=m
CONFIG_PARIDE_DSTR=m
CONFIG_PARIDE_FIT2=m
CONFIG_PARIDE_FIT3=m
CONFIG_PARIDE_EPAT=m
CONFIG_PARIDE_EPIA=m
CONFIG_PARIDE_FRIQ=m
CONFIG_PARIDE_FRPW=m
CONFIG_PARIDE_KBIC=m
CONFIG_PARIDE_KTTI=m
CONFIG_PARIDE_ON20=m
CONFIG_PARIDE_ON26=m
CONFIG_BLK_DEV_IDE_MODES=y
# CONFIG_BLK_DEV_HD is not set

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_NETLINK=y
CONFIG_RTNETLINK=y
CONFIG_NETLINK_DEV=y
CONFIG_FIREWALL=y
CONFIG_FILTER=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
CONFIG_IP_FIREWALL=y
CONFIG_IP_FIREWALL_NETLINK=y
CONFIG_NETLINK_DEV=y
CONFIG_IP_ALWAYS_DEFRAG=y
CONFIG_IP_TRANSPARENT_PROXY=y
CONFIG_IP_MASQUERADE=y

#
# Protocol-specific masquerading support will be built as modules.
#
CONFIG_IP_MASQUERADE_ICMP=y

#
# Protocol-specific masquerading support will be built as modules.
#
CONFIG_IP_MASQUERADE_MOD=y
CONFIG_IP_MASQUERADE_IPAUTOFW=m
CONFIG_IP_MASQUERADE_IPPORTFW=m
CONFIG_IP_MASQUERADE_MFW=m
# CONFIG_IP_ROUTER is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
# CONFIG_IP_MROUTE is not set
CONFIG_IP_ALIAS=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y

#
# (it is safe to leave these untouched)
#
CONFIG_INET_RARP=m
CONFIG_SKB_LARGE=y
# CONFIG_IPV6 is not set

#
#  
#
CONFIG_IPX=m
# CONFIG_IPX_INTERN is not set
# CONFIG_SPX is not set
CONFIG_ATALK=m
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_BRIDGE is not set
# CONFIG_LLC is not set
# CONFIG_ECONET is not set
CONFIG_WAN_ROUTER=m
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
# CONFIG_CPU_IS_SLOW is not set

#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set

#
# SCSI support
#
CONFIG_SCSI=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y

#
# SCSI low-level drivers
#
CONFIG_SCSI_7000FASST=m
CONFIG_SCSI_ACARD=m
CONFIG_SCSI_AHA152X=m
CONFIG_SCSI_AHA1542=m
CONFIG_SCSI_AHA1740=m
CONFIG_SCSI_AIC7XXX=m
# CONFIG_AIC7XXX_TCQ_ON_BY_DEFAULT is not set
CONFIG_AIC7XXX_CMDS_PER_DEVICE=8
CONFIG_AIC7XXX_PROC_STATS=y
CONFIG_AIC7XXX_RESET_DELAY=5
CONFIG_SCSI_ADVANSYS=m
CONFIG_SCSI_IN2000=m
CONFIG_SCSI_AM53C974=m
CONFIG_SCSI_MEGARAID=m
CONFIG_MEGARAID_MULTI_IO=y
CONFIG_SCSI_BUSLOGIC=m
# CONFIG_SCSI_OMIT_FLASHPOINT is not set
CONFIG_SCSI_DTC3280=m
CONFIG_SCSI_EATA=m
CONFIG_SCSI_EATA_TAGGED_QUEUE=y
# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set
CONFIG_SCSI_EATA_MAX_TAGS=16
CONFIG_SCSI_EATA_DMA=m
CONFIG_SCSI_EATA_PIO=m
CONFIG_SCSI_FUTURE_DOMAIN=m
CONFIG_SCSI_GDTH=m
CONFIG_SCSI_GENERIC_NCR5380=m
# CONFIG_SCSI_GENERIC_NCR53C400 is not set
CONFIG_SCSI_G_NCR5380_PORT=y
# CONFIG_SCSI_G_NCR5380_MEM is not set
CONFIG_SCSI_INITIO=m
CONFIG_SCSI_INIA100=m
CONFIG_SCSI_PPA=m
CONFIG_SCSI_IMM=m
# CONFIG_SCSI_IZIP_EPP16 is not set
# CONFIG_SCSI_IZIP_SLOW_CTR is not set
CONFIG_SCSI_NCR53C406A=m
CONFIG_SCSI_SYM53C416=m
CONFIG_SCSI_NCR53C7xx=m
# CONFIG_SCSI_NCR53C7xx_sync is not set
CONFIG_SCSI_NCR53C7xx_FAST=y
CONFIG_SCSI_NCR53C7xx_DISCONNECT=y
CONFIG_SCSI_NCR53C8XX=m
CONFIG_SCSI_SYM53C8XX=m
CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=8
CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32
CONFIG_SCSI_NCR53C8XX_SYNC=20
CONFIG_SCSI_NCR53C8XX_PROFILE=y
# CONFIG_SCSI_NCR53C8XX_IOMAPPED is not set
CONFIG_SCSI_NCR53C8XX_PQS_PDS=y
# CONFIG_SCSI_NCR53C8XX_SYMBIOS_COMPAT is not set
CONFIG_SCSI_PAS16=m
# CONFIG_SCSI_PCI2000 is not set
# CONFIG_SCSI_PCI2220I is not set
CONFIG_SCSI_PSI240I=m
CONFIG_SCSI_QLOGIC_FAS=m
CONFIG_SCSI_QLOGIC_ISP=m
CONFIG_SCSI_QLOGIC_FC=m
CONFIG_SCSI_SEAGATE=m
CONFIG_SCSI_DC390T=m
# CONFIG_SCSI_DC390T_NOGENSUPP is not set
CONFIG_SCSI_T128=m
CONFIG_SCSI_U14_34F=m
# CONFIG_SCSI_U14_34F_LINKED_COMMANDS is not set
CONFIG_SCSI_U14_34F_MAX_TAGS=8
CONFIG_SCSI_ULTRASTOR=m
CONFIG_SCSI_DEBUG=m

#
# Network device support
#
CONFIG_NETDEVICES=y

#
# ARCnet devices
#
# CONFIG_ARCNET is not set
CONFIG_DUMMY=m
CONFIG_EQUALIZER=m
CONFIG_ETHERTAP=m

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_NET_VENDOR_3COM=y
CONFIG_EL1=m
CONFIG_EL2=m
CONFIG_ELPLUS=m
CONFIG_EL16=m
CONFIG_EL3=m
CONFIG_3C515=m
CONFIG_VORTEX=m
CONFIG_LANCE=m
CONFIG_NET_VENDOR_SMC=y
CONFIG_WD80x3=m
CONFIG_ULTRA=m
CONFIG_ULTRA32=m
CONFIG_SMC9194=m
CONFIG_NET_VENDOR_RACAL=y
CONFIG_NI5010=m
CONFIG_NI52=m
CONFIG_NI65=m
CONFIG_RTL8139=m
CONFIG_YELLOWFIN=m
CONFIG_NET_ISA=y
CONFIG_AT1700=m
CONFIG_E2100=m
CONFIG_DEPCA=m
CONFIG_EWRK3=m
CONFIG_EEXPRESS=m
CONFIG_EEXPRESS_PRO=m
CONFIG_FMV18X=m
CONFIG_HPLAN_PLUS=m
CONFIG_HPLAN=m
CONFIG_HP100=m
CONFIG_ETH16I=m
CONFIG_NE2000=m
# CONFIG_SEEQ8005 is not set
CONFIG_SK_G16=y
CONFIG_NET_EISA=y
CONFIG_PCNET32=m
CONFIG_ACENIC=m
CONFIG_AC3200=m
CONFIG_APRICOT=m
CONFIG_CS89x0=m
CONFIG_DE4X5=m
CONFIG_DEC_ELCP=m
CONFIG_DGRS=m
CONFIG_EEXPRESS_PRO100=m
CONFIG_LNE390=m
CONFIG_NE3210=m
CONFIG_NE2K_PCI=m
CONFIG_TLAN=m
CONFIG_VIA_RHINE=m
CONFIG_ES3210=m
CONFIG_EPIC100=m
# CONFIG_ZNET is not set
#CONFIG_NET_POCKET=y
CONFIG_ATP=y
CONFIG_DE600=m
CONFIG_DE620=m
# CONFIG_FDDI=y
# CONFIG_DEFXX is not set
# CONFIG_HIPPI is not set

#
# Appletalk devices
#
CONFIG_LTPC=m
CONFIG_COPS=m
CONFIG_COPS_DAYNA=y
CONFIG_COPS_TANGENT=y
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
CONFIG_IPDDP_DECAP=y
CONFIG_PLIP=m
CONFIG_PPP=m

#
# CCP compressors for PPP are only built as modules.
#
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
CONFIG_NET_RADIO=y
CONFIG_STRIP=m
CONFIG_WAVELAN=m
CONFIG_ARLAN=m

#
# Token ring devices
#
CONFIG_TR=y
CONFIG_IBMTR=m
CONFIG_IBMOL=m
CONFIG_SKTR=m
CONFIG_RCPCI=m
CONFIG_SHAPER=m

#
# Wan interfaces
#
CONFIG_HOSTESS_SV11=m
CONFIG_COSA=m
CONFIG_SEALEVEL_4021=m
CONFIG_DLCI=m
CONFIG_DLCI_COUNT=24
CONFIG_DLCI_MAX=8
CONFIG_SDLA=m
CONFIG_WAN_DRIVERS=y
CONFIG_VENDOR_SANGOMA=m
CONFIG_WANPIPE_CARDS=4
# CONFIG_WANPIPE_X25 is not set
# CONFIG_WANPIPE_FR is not set
CONFIG_WANPIPE_PPP=y
CONFIG_WANPIPE_CHDLC=y

#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set

#
# IrDA subsystem support
#
CONFIG_IRDA=m

#
# IrDA protocols
#
CONFIG_IRLAN=m
CONFIG_IRCOMM=m
CONFIG_IRLPT=m
CONFIG_IRLPT_CLIENT=m
CONFIG_IRLPT_SERVER=m
CONFIG_IRDA_OPTIONS=y

#
#    IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
CONFIG_IRDA_FAST_RR=y
# CONFIG_IRDA_DEBUG is not set
CONFIG_IRDA_COMPRESSION=y

#
#    IrDA compressors
#
CONFIG_IRDA_DEFLATE=m

#
# Infrared-port device drivers
#

#
# SIR device drivers
#
CONFIG_IRTTY_SIR=m
CONFIG_IRPORT_SIR=m

#
# FIR device drivers
#
CONFIG_NSC_FIR=m
CONFIG_WINBOND_FIR=m
CONFIG_SHARP_FIR=m
CONFIG_TOSHIBA_FIR=m
CONFIG_SMC_IRCC_FIR=m

#
# Dongle support
#
CONFIG_DONGLE=y
CONFIG_ESI_DONGLE=m
CONFIG_ACTISYS_DONGLE=m
CONFIG_TEKRAM_DONGLE=m
CONFIG_GIRBIL_DONGLE=m
CONFIG_LITELINK_DONGLE=m

#
# ISDN subsystem
#
CONFIG_ISDN=m
CONFIG_ISDN_PPP=y
CONFIG_ISDN_PPP_VJ=y
CONFIG_ISDN_MPP=y
CONFIG_ISDN_AUDIO=y
CONFIG_ISDN_DRV_ICN=m
CONFIG_ISDN_DRV_LOOP=m
CONFIG_ISDN_DRV_PCBIT=m
CONFIG_ISDN_DRV_HISAX=m
CONFIG_HISAX_EURO=y
CONFIG_DE_AOC=y
# CONFIG_HISAX_NO_SENDCOMPLETE is not set
# CONFIG_HISAX_NO_LLC is not set
CONFIG_HISAX_1TR6=y
CONFIG_HISAX_16_0=y
CONFIG_HISAX_16_3=y
CONFIG_HISAX_TELES3C=y
CONFIG_HISAX_TELESPCI=y
CONFIG_HISAX_S0BOX=y
CONFIG_HISAX_AVM_A1=y
CONFIG_HISAX_FRITZPCI=y
CONFIG_HISAX_AVM_A1_PCMCIA=y
CONFIG_HISAX_ELSA=y
CONFIG_HISAX_IX1MICROR2=y
CONFIG_HISAX_DIEHLDIVA=y
CONFIG_HISAX_ASUSCOM=y
CONFIG_HISAX_TELEINT=y
CONFIG_HISAX_SEDLBAUER=y
CONFIG_HISAX_SPORTSTER=y
CONFIG_HISAX_MIC=y
CONFIG_HISAX_NETJET=y
CONFIG_HISAX_NICCY=y
# CONFIG_ISDN_DRV_SC is not set
# CONFIG_ISDN_DRV_ACT2000 is not set
CONFIG_ISDN_DRV_EICON=m
CONFIG_ISDN_DRV_AVMB1=m
CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y

#
# Old CD-ROM drivers (not SCSI, not IDE)
#
CONFIG_CD_NO_IDESCSI=y
CONFIG_AZTCD=m
CONFIG_GSCD=m
CONFIG_SBPCD=m
CONFIG_MCD=m
CONFIG_MCD_IRQ=11
CONFIG_MCD_BASE=300
CONFIG_MCDX=m
CONFIG_OPTCD=m
CONFIG_CM206=m
CONFIG_SJCD=m
CONFIG_ISP16_CDI=m
CONFIG_CDU31A=m
CONFIG_CDU535=m

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_SERIAL=y
CONFIG_SERIAL_CONSOLE=y
CONFIG_SERIAL_EXTENDED=y
CONFIG_SERIAL_MANY_PORTS=y
CONFIG_SERIAL_SHARE_IRQ=y
# CONFIG_SERIAL_DETECT_IRQ is not set
CONFIG_SERIAL_MULTIPORT=y
# CONFIG_HUB6 is not set
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_ROCKETPORT=m
CONFIG_DIGIEPCA=m
CONFIG_CYCLADES=m
CONFIG_STALDRV=y
CONFIG_STALLION=m
CONFIG_ISTALLION=m
CONFIG_RISCOM8=m
CONFIG_SPECIALIX=m
CONFIG_SPECIALIX_RTSCTS=y
CONFIG_ESPSERIAL=m
CONFIG_ISI=m
CONFIG_SYNCLINK=m
CONFIG_N_HDLC=m
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
CONFIG_PRINTER=m
# CONFIG_PRINTER_READBACK is not set
CONFIG_MOUSE=y

#
# Mice
#
CONFIG_ATIXL_BUSMOUSE=m
CONFIG_BUSMOUSE=m
CONFIG_MS_BUSMOUSE=m
CONFIG_PSMOUSE=y
CONFIG_82C710_MOUSE=m
CONFIG_PC110_PAD=m
# CONFIG_QIC02_TAPE is not set
CONFIG_WATCHDOG=y

#
# Watchdog Cards
#
# CONFIG_WATCHDOG_NOWAYOUT is not set
CONFIG_WDT=m
# CONFIG_WDT_501 is not set
CONFIG_SOFT_WATCHDOG=m
CONFIG_PCWATCHDOG=m
CONFIG_ACQUIRE_WDT=m
CONFIG_NVRAM=m
CONFIG_RTC=y

#
# Video For Linux
#
CONFIG_VIDEO_DEV=m
CONFIG_RADIO_RTRACK=m
CONFIG_RADIO_RTRACK2=m
CONFIG_RADIO_AZTECH=m
CONFIG_RADIO_CADET=m
CONFIG_RADIO_MIROPCM20=m
CONFIG_RADIO_GEMTEK=m
CONFIG_VIDEO_BT848=m
CONFIG_VIDEO_BWQCAM=m
CONFIG_VIDEO_CQCAM=m
CONFIG_VIDEO_PMS=m
CONFIG_VIDEO_SAA5249=m
CONFIG_RADIO_SF16FMI=m
CONFIG_RADIO_TYPHOON=m
CONFIG_RADIO_TYPHOON_PROC_FS=y
CONFIG_RADIO_ZOLTRIX=m

#
# Joystick support
#
CONFIG_JOYSTICK=m
CONFIG_JOY_ANALOG=m
CONFIG_JOY_ASSASIN=m
CONFIG_JOY_GRAVIS=m
CONFIG_JOY_LOGITECH=m
CONFIG_JOY_SIDEWINDER=m
CONFIG_JOY_THRUSTMASTER=m
CONFIG_JOY_LIGHTNING=m
CONFIG_JOY_CONSOLE=m
CONFIG_JOY_DB9=m
CONFIG_JOY_TURBOGRAFX=m
CONFIG_DTLK=m
CONFIG_DMARAM=m

#
# Ftape, the floppy tape device driver
#
CONFIG_FTAPE=m
CONFIG_ZFTAPE=m
CONFIG_ZFT_DFLT_BLK_SZ=10240

#
# The compressor will be built as a module only!
#
CONFIG_ZFT_COMPRESSOR=m
CONFIG_FT_NR_BUFFERS=3
# CONFIG_FT_PROC_FS is not set
CONFIG_FT_NORMAL_DEBUG=y
# CONFIG_FT_FULL_DEBUG is not set
# CONFIG_FT_NO_TRACE is not set
# CONFIG_FT_NO_TRACE_AT_ALL is not set

#
# Hardware configuration
#
CONFIG_FT_STD_FDC=y
# CONFIG_FT_MACH2 is not set
# CONFIG_FT_PROBE_FC10 is not set
# CONFIG_FT_ALT_FDC is not set
CONFIG_FT_FDC_THR=8
CONFIG_FT_FDC_MAX_RATE=2000

#
# ONLY for DEC Alpha architectures
#
CONFIG_FT_ALPHA_CLOCK=0

#
# Filesystems
#
CONFIG_QUOTA=y
CONFIG_AUTOFS_FS=m
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
CONFIG_HFS_FS=m
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_UMSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_MINIX_FS=m
# CONFIG_NTFS_FS is not set
CONFIG_HPFS_FS=m
CONFIG_PROC_FS=y
CONFIG_DEVPTS_FS=y
# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=m
CONFIG_EXT2_FS=y
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set

#
# Network File Systems
#
CONFIG_CODA_FS=m
CONFIG_NFS_FS=m
CONFIG_NFSD=m
CONFIG_NFSD_SUN=y
CONFIG_SUNRPC=m
CONFIG_LOCKD=m
CONFIG_SMB_FS=m
# CONFIG_SMB_WIN95 is not set
CONFIG_NCP_FS=m
CONFIG_NCPFS_PACKET_SIGNING=y
CONFIG_NCPFS_IOCTL_LOCKING=y
CONFIG_NCPFS_STRONG=y
CONFIG_NCPFS_NFS_NS=y
CONFIG_NCPFS_OS2_NS=y
# CONFIG_NCPFS_SMALLDOS is not set
CONFIG_NCPFS_MOUNT_SUBDIR=y
CONFIG_NCPFS_NLS=y
CONFIG_NCPFS_EXTRAS=y

#
# Partition Types
#
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MAC_PARTITION is not set
# CONFIG_SMD_DISKLABEL is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
CONFIG_NLS=y

#
# Native Language Support
#
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m

#
# Console drivers
#
CONFIG_VGA_CONSOLE=y
CONFIG_VIDEO_SELECT=y
CONFIG_MDA_CONSOLE=m
# CONFIG_FB is not set

#
# Sound
#
CONFIG_SOUND=m
CONFIG_PCSP=m
# CONFIG_PCSP_NO_TEST_SPEED is not set
CONFIG_PCSP_16BIT=y
CONFIG_PCSP_LEFT=100
CONFIG_PCSP_RIGHT=100
CONFIG_SOUND_ES1370=m
CONFIG_SOUND_ES1371=m
CONFIG_SOUND_SONICVIBES=m
CONFIG_SOUND_MSNDCLAS=m
# CONFIG_MSNDCLAS_HAVE_BOOT is not set
CONFIG_MSNDCLAS_INIT_FILE="/etc/sound/msndinit.bin"
CONFIG_MSNDCLAS_PERM_FILE="/etc/sound/msndperm.bin"
CONFIG_SOUND_MSNDPIN=m
# CONFIG_MSNDPIN_HAVE_BOOT is not set
CONFIG_MSNDPIN_INIT_FILE="/etc/sound/pndspini.bin"
CONFIG_MSNDPIN_PERM_FILE="/etc/sound/pndsperm.bin"
CONFIG_SOUND_OSS=m
CONFIG_SOUND_PAS=m
CONFIG_SOUND_SB=m
CONFIG_SOUND_PCISB=m
CONFIG_SOUND_ESSMAESTRO=m
CONFIG_SOUND_ADLIB=m
CONFIG_SOUND_GUS=m
CONFIG_GUS16=y
CONFIG_GUSMAX=y
CONFIG_SOUND_MPU401=m
CONFIG_SOUND_PSS=m
# CONFIG_PSS_MIXER is not set
CONFIG_SOUND_MSS=m
CONFIG_SOUND_SSCAPE=m
CONFIG_SOUND_TRIX=m
CONFIG_SOUND_MAD16=m
CONFIG_MAD16_OLDCARD=y
CONFIG_SOUND_WAVEFRONT=m
CONFIG_SOUND_CS4232=m
CONFIG_SOUND_OPL3SA2=m
CONFIG_SOUND_MAUI=m
CONFIG_SOUND_SGALAXY=m
CONFIG_SOUND_AD1816=m
CONFIG_SOUND_OPL3SA1=m
CONFIG_SOUND_SOFTOSS=m
CONFIG_SOUND_YM3812=m
CONFIG_SOUND_VMIDI=m
CONFIG_SOUND_UART6850=m
CONFIG_SOUND_USBAUDIO=m
CONFIG_SOUND_WAVEARTIST=m

#
# Additional low level sound drivers
#
CONFIG_LOWLEVEL_SOUND=y
CONFIG_ACI_MIXER=m
CONFIG_AWE32_SYNTH=m
CONFIG_AEDSP16=m
CONFIG_AEDSP16_BASE=220
CONFIG_MPU_BASE=330

#
# SC-6600 Audio Cards have no jumper switches at all
#
CONFIG_SC6600=y

#
# SC-6600 specific configuration
#
CONFIG_SC6600_JOY=y
CONFIG_SC6600_CDROM=4
CONFIG_SC6600_CDROMBASE=0
CONFIG_AEDSP16_SBPRO=y

#
# Audio Excel DSP 16 [Sound Blaster Pro]
#
CONFIG_AEDSP16_BASE=220
CONFIG_AEDSP16_SB_IRQ=5
CONFIG_AEDSP16_SB_DMA=0
CONFIG_AEDSP16_MPU401=y

#
# Audio Excel DSP 16 [MPU-401]
#
CONFIG_AEDSP16_MPU_IRQ=5

#
# Kernel hacking
#
CONFIG_MAGIC_SYSRQ=y

Next-in-Thread Next Message

Messages Inline: 1 All Outline: 1 2 All

1. Ok "Naive" solution (but it works...) by massimo bernaschi, 2000, Jul 14

Add Message to: "problems after kernel update"

Members Subscribe Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10