Next-in-Thread Next Message

Question Problems with Toshiba Tecra 8000 & Deskstation V+ Dockingstation 

Forum: PCMCIA on Toshiba laptops
Date: 2000, Jul 18
From: Markus Lang Pretender


I have a problem with my tecra 8000 and a deskstation v+. The PCMCIA sockets in the laptop works fine, but the 2 sockets in the dockingstation (topic 95 controler) donīt recognize any card injections. also the cards donīt work, if they were present at boot-time. Iīve tried it with a 3com ethernet card and a Adaptec 1480U scsi host adapter. both cards work fine in the laptop sockets.

Iīm using the 2.2.16 kernel, pcmcia-3.1.18 and suse 6.3


kernel: Linux PCMCIA Card Services 3.1.18
kernel:   kernel build: 2.2.16 #1 Tue Jul 18 14:24:05 CEST 2000
kernel:   options:  [pci] [cardbus] [apm] [pnp]
kernel: PCI routing table version 1.0 at 0xf0f90
kernel: PnP: PNP BIOS installation structure at 0xc00fed00
kernel: PnP: PNP BIOS version 1.0, entry at f0000:92c6, dseg at 0
kernel: Intel PCIC probe: 
kernel:   Toshiba ToPIC97 rev 05 PCI-to-CardBus at slot 00:0b, mem 0x68000000
kernel:     host opts [0]: [slot 0xf0] [ccr 0x10] [cdr 0x86] [rcr 0x02] [pci irq 11] [lat 168/176] [bus 20/20]
kernel:     host opts [1]: [slot 0xf0] [ccr 0x20] [cdr 0x86] [rcr 0x02] [pci irq 11] [lat 168/176] [bus 21/21]
kernel:     ISA irqs (default) = 10 PCI status changes
kernel:   Toshiba ToPIC95-B rev 87 PCI-to-CardBus at slot 01:04, mem 0x68000000
kernel:     host opts [0]: [slot 0xf4] [ccr 0x1c] [cdr 0x86] [rcr 0x02] [no pci irq] [lat 168/176] [bus 18/18]
kernel:     host opts [1]: [slot 0xf5] [ccr 0x2c] [cdr 0x86] [rcr 0x02] [no pci irq] [lat 168/176] [bus 19/19]
kernel:     ISA irqs (default) = 10 polling interval = 1000 ms
cardmgr[533]: starting, version is 3.1.18 cardmgr[533]: watching 4 sockets
kernel: cs: IO port probe 0x0c00-0x0cff: clean.
kernel: cs: IO port probe 0x0800-0x08ff: clean.
kernel: cs: IO port probe 0x0100-0x04ff: clean.
kernel: cs: IO port probe 0x0a00-0x0aff: clean.

iīve readed the stuff in the howto about polling the sockets, but the topic95 controller is allready in polling status.

hum... help?! ;-)

cu , pretender

Next-in-Thread Next Message

Select this message: Problems with Toshiba Tecra 8000 & Deskstation V+ Dockingstation

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.

If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination

If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages

Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

Members Subscribe No Admin Mode Show Frames Help for HyperNews at 1.10
[ Edit This Forum ]